[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Possible Errors

On Mon, 31 Jan 2005, Latimer, S wrote:

> I downloaded what I think is the src release (NetCDF Source Code, V3.6.0 
> (netcdf.tar.Z) ).  I then gunzipped and untarred it.  Then I followed the 
> commands you listed below.  After performing those commands, I then attempted 
> to re-execute the commands given previously for the decoders package.  It 
> still gave the same erros.
looks like the netcdf release built ok
> Also, I think I gave you full permissions by changing the chmod of the 
> directory /usr/local.  It looks as if you have rwx permissions on those files.

i still don't have permission to change the decoders file. a simple way to
do it would be at /usr/local  chown robb decoders-3.0.7 then at

/usr/local/decoders-3.0.7   chown -R robb

after you are up and running you can change the ownership back

robb...
>
> Stephen
>
> Stephen Latimer
> Meteorology Graduate Student
> Texas Tech University ATMO
> Lubbock, TX 79409
>
>
>
> -----Original Message-----
> From: Robb Kambic [mailto:address@hidden]
> Sent: Mon 1/31/2005 14:55
> To: Latimer, S
> Cc: decoders
> Subject: Re: Possible Errors
>
> On Mon, 31 Jan 2005, Latimer, S wrote:
>
> > I changed the directories as listed below in the CUSTOMIZE file.  After 
> > running the command below, I found the following errors after executing the 
> > below commands:
> >
> > % make
> >
>
> the problem is that the netcdf binary release you have is not compatiable
> with the decoders build. you need to download the netcdf src release and
> build it.  it usually builds 1st time. a couple of things,
>
> % CC=gcc;export CC
> % FC="";export FC
> % ./configure  from src dir
> % make
> % make test
> % make install
>
> my login didn't have any permissions so i couldn't fix any errors, all i
> could do is look around for problems
>
> robb...
>
>
> > In file included from gribtonc.c:24:
> > nc.h:12:20: netcdf.h: No such file or directory
> > In file included from gribtonc.c:24:
> > nc.h:30: parse error before "nc_type"
> > nc.h:30: warning: no semicolon at end of struct or union
> > nc.h:36: parse error before '}' token
> > nc.h:36: warning: data definition has no type or storage class
> > nc.h:40: parse error before "nclong"
> > nc.h:40: warning: no semicolon at end of struct or union
> > nc.h:41: warning: data definition has no type or storage class
> > nc.h:65: parse error before "lset"
> > nc.h:65: warning: no semicolon at end of struct or union
> > nc.h:66: warning: data definition has no type or storage class
> > nc.h:69: parse error before '}' token
> > nc.h:69: warning: data definition has no type or storage class
> > nc.h:79: parse error before "ncvar"
> > nc.h:79: warning: no semicolon at end of struct or union
> > nc.h:83: parse error before "models"
> > nc.h:83: warning: data definition has no type or storage class
> > nc.h:84: parse error before '*' token
> > nc.h:84: warning: data definition has no type or storage class
> > nc.h:91: parse error before '}' token
> > nc.h:91: warning: data definition has no type or storage class
> > nc.h:106: parse error before '*' token
> > nc.h:106: warning: data definition has no type or storage class
> > nc.h:107: parse error before "ncfile"
> > In file included from gribtonc.c:33:
> > units.h:29: parse error before "ncfile"
> > gribtonc.c: In function `do_nc':
> > gribtonc.c:229: `ncp' undeclared (first use in this function)
> > gribtonc.c:229: (Each undeclared identifier is reported only once
> > gribtonc.c:229: for each function it appears in.)
> > make[1]: *** [gribtonc.o] Error 1
> > make[1]: Leaving directory `/usr/local/decoders-3.0.7/src/gribtonc'
> > make: *** [gribtonc/all] Error 1
> >
> > % make test  (not sure whether the below statements are indeed errors)
> >
> > which: no ncgen in (/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin
> > :/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin)
> > metar tested ...... NOT OK
> > ascii tested ...... NOT OK
> > ldmConnect tested . NOT OK
> > metar tested ...... NOT OK
> > syn tested ........ NOT OK
> > buoy tested ....... NOT OK
> > upperair tested ... NOT OK
> >
> > % make install
> >
> > In file included from gribtonc.c:24:
> > nc.h:12:20: netcdf.h: No such file or directory
> > In file included from gribtonc.c:24:
> > nc.h:30: parse error before "nc_type"
> > nc.h:30: warning: no semicolon at end of struct or union
> > nc.h:36: parse error before '}' token
> > nc.h:36: warning: data definition has no type or storage class
> > nc.h:40: parse error before "nclong"
> > nc.h:40: warning: no semicolon at end of struct or union
> > nc.h:41: warning: data definition has no type or storage class
> > nc.h:65: parse error before "lset"
> > nc.h:65: warning: no semicolon at end of struct or union
> > nc.h:66: warning: data definition has no type or storage class
> > nc.h:69: parse error before '}' token
> > nc.h:69: warning: data definition has no type or storage class
> > nc.h:79: parse error before "ncvar"
> > nc.h:79: warning: no semicolon at end of struct or union
> > nc.h:83: parse error before "models"
> > nc.h:83: warning: data definition has no type or storage class
> > nc.h:84: parse error before '*' token
> > nc.h:84: warning: data definition has no type or storage class
> > nc.h:91: parse error before '}' token
> > nc.h:91: warning: data definition has no type or storage class
> > nc.h:106: parse error before '*' token
> > nc.h:106: warning: data definition has no type or storage class
> > nc.h:107: parse error before "ncfile"
> > In file included from gribtonc.c:33:
> > units.h:29: parse error before "ncfile"
> > gribtonc.c: In function `do_nc':
> > gribtonc.c:229: `ncp' undeclared (first use in this function)
> > gribtonc.c:229: (Each undeclared identifier is reported only once
> > gribtonc.c:229: for each function it appears in.)
> > make[3]: *** [gribtonc.o] Error 1
> > make[3]: Leaving directory `/usr/local/decoders-3.0.7/src/gribtonc'
> > make[2]: *** [installed_binfiles] Error 1
> > make[2]: Leaving directory `/usr/local/decoders-3.0.7/src/gribtonc'
> > make[1]: *** [installed_programs] Error 2
> > make[1]: Leaving directory `/usr/local/decoders-3.0.7/src/gribtonc'
> > make: *** [gribtonc/install] Error 1
> >
> >
> > I then switched to the bin directory using 'cd ../bin' and ls with only 
> > gribdump and ncgen listed.
> > Thanks again for all of your help.
> >
> > Stephen
> >
> >
> >
> >
> > Stephen Latimer
> > Meteorology Graduate Student
> > Texas Tech University ATMO
> > Lubbock, TX 79409
> >
> >
> >
> > -----Original Message-----
> > From: Robb Kambic [mailto:address@hidden]
> > Sent: Mon 1/31/2005 13:39
> > To: Latimer, S
> > Cc: decoders
> > Subject: RE: udunits and netCDF
> >
> >
> > here's what i found.
> >
> > your /usr/local/decoders-3.0.7/src/CUSTOMIZE file has the wrong paths:
> >
> > you have
> > CPP_NETCDF=/usr/local/netcdf/include
> >
> > should be
> >
> > CPP_NETCDF=/usr/local/netcdf-3.6.0/include
> >
> > again should be
> >
> > LD_NETCDF='-L/usr/local/netcdf-3.6.0/lib -lnetcdf'
> >
> > udunits likewise:
> >
> > CPP_UDUNITS=-I/usr/local/udunits-1.11.7/include
> > LD_UDUNITS='-L/usr/local/udunits-1.11.7/lib -ludunits'
> >
> > do these commands:
> >
> > % cd /usr/local/decoders-3.0.7/src
> > % rm config.log config.status
> > % ./configure
> > % make   look for error messages
> > % make test   look for error messages/ perl decoders will fail, that's ok
> > % make install
> > % cd ../bin
> > % ls      should have gribdump gribtocdl gribtonc
> > % UDUNITS_PATH=/usr/local/udunits-1.11.7/etc/udunits.dat;export UDUNITS_PATH
> > % ls $UDUNITS_PATH   should find file udunits.dat
> >
> >
> > at this point you should be able to run the gribtonc with the invocation
> > you did before.  if it says file not found, prefix with ./
> >
> > robb...
> > ===============================================================================
> > Robb Kambic                            Unidata Program Center
> > Software Engineer III                          Univ. Corp for Atmospheric 
> > Research
> > address@hidden                 WWW: http://www.unidata.ucar.edu/
> > ===============================================================================
> >
> >
> >
> >
>
> ===============================================================================
> Robb Kambic                              Unidata Program Center
> Software Engineer III                    Univ. Corp for Atmospheric Research
> address@hidden                   WWW: http://www.unidata.ucar.edu/
> ===============================================================================
>
>
>
>

===============================================================================
Robb Kambic                                Unidata Program Center
Software Engineer III                      Univ. Corp for Atmospheric Research
address@hidden             WWW: http://www.unidata.ucar.edu/
===============================================================================