[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [decoders] Could not find table



 Robb,
 I am really grateful for your attention to assist us resolve this problem.
I sent your comments for our analysts, who will make data analyses to promote
the needed changes...

 Thanks for attention!

 Cheers,
 Eduardo.

Quoting Robb Kambic <address@hidden>:

Eduardo,

I made the table and debugged the test data. It seems that the GDS
section is not standard, especially the number of parellels is way out
of
the proper range and then the scanning mode value is probably wrong
too. According to ECMWF documentation, the max number of parellels is
800.  If the data is standard format then I can proceed in debugging.

Robb...

                            Np : 30464.0
                 Scanning mode : 2


                        Header : GRIB1
                    Discipline : 0 Meteorological Products
                  GRIB Edition : 1
                   GRIB length : 147540
            Originating Center : 46 Brazilian Space Agency - INPE
        Originating Sub-Center : 0 WMO Secretariat
            Product Definition : 0 Forecast/Uninitialized Analysis/Image
Product
            Parameter Category : -1 Meteorological Parameters
                Parameter Name : 132 TOPO Topography
               Parameter Units : m
                Reference Time : 2009-03-11T12:00:00Z
                    Time Units : hour
          Time Range Indicator : product valid at RT + P1
                   Time 1 (P1) : 0
                   Time 2 (P2) : 0
       Generating Process Type : 2 Ultra Violet Index Model
                    Level Type : 1 surface
                 Level Value 1 : 0.0
                 Level Value 2 : 0.0
                    GDS Exists : true
                    BMS Exists : false
         Number of data points : 73728
                     Grid Name : Gaussian Latitude/Longitude
                     Grid Shape: 0 spherical
         Spherical earth radius: 6367.47
                            Nx : 384
                            Ny : 192
                           La1 : -89.284
                           Lo1 : 0.0
  Resolution & Component flags : 128
                         Winds : True
                           La2 : 89.284
                           Lo2 : 359.063
                            Dx : 0.938
                            Np : 30464.0
                 Scanning mode : 2





On Tue, 17 Mar 2009, address@hidden wrote:

Robb,
there are samples (grib files) and the grib table to access them in the
following ftp address:

=> ftp://ftp1.cptec.inpe.br/eduardo/ <=

So, I still wait for response...

Thanks!

Cheers,
Eduardo.

Quoting Robb Kambic <address@hidden>:

Eduardo,

the easiest way to solve this is to make a sample file available so I
can debug the problem. Also, send the table so I can use/add it.

Thanks,
Robb....




On Tue, 17 Mar 2009, address@hidden wrote:

Hi Robb,
I would like to thank you for your tips to update the grib-6.0.jar and my
grib tables. (I intend to send it (tables) for you as soon as possible...)

But, now I have a little problem to read my grib file. When I try to read it
the following error message come from:

ucar.grib.NoValidGribException: GDS: This scanning mode (2) is not supported. at ucar.grib.grib1.Grib1GridDefinitionSection.<init>(Grib1GridDefinitionSection.java:436)
   at ucar.grib.grib1.Grib1Input.scan(Grib1Input.java:155)
   at ucar.grib.grib1.Grib1Indexer.writeFileIndex(Grib1Indexer.java:91)
   at recortes.Grib.read(Grib.java:58)
   at recortes.Main.main(Main.java:86)

That file is a model result for the global forecast and has gaussian grids
to represent the latitudes. How can I proceed to read that file?

May you help me with it???

Thanks in advanced!

Cheers,

Eduardo.

Quoting Robb Kambic <address@hidden>:

On Tue, 17 Mar 2009, address@hidden wrote:

Does anyone could help me with the following error message?

Could not find table for center:46 subcenter:0 number:-1
ucar.grib.NotSupportedException: Could not find a table entry for GRIB file with center: 46 subCenter: 0 number: 128
         at

Hiya Eduardo,

looking for a table for that has center: 46 subCenter: 0 number: 128


ucar.grib.grib1.GribPDSParamTable.getParameterTable(GribPDSParamTable.java:278)
at ucar.grib.grib1.Grib1ProductDefinitionSection.<init>(Grib1ProductDefinitionSection.java:388)
         at ucar.grib.grib1.Grib1Input.scan(Grib1Input.java:146)
         at ucar.grib.grib1.Grib1Indexer.writeFileIndex(Grib1Indexer.java:91)
         at recortes.Grib.read(Grib.java:58)
         at recortes.Main.main(Main.java:86)

What does it mean???

I tried to update the "grib-6.0.jar" file including my tables and using that command (Windows OS):

ok, the commands to update the jars are very particular about paths and
names. look at the jar using

% jar tvf grib-6.0.jar

resources/grib/tables/tablelookup.lst




lib> jar -uf grib-6.0.jar ..\resourses\grib\tables\mytable128.tab ..\resourses\grib\tables\tableslookup.lst


so the command should look like:

% jar -uf grib-6.0.jar resourses\grib\tables\inpegrib_glb.tab
resourses\grib\tables\tableslookup.lst

according to what you named the table below.


after you are done look at the jar again with the tvf flags.

The table required (number 128) starts like it:

-1:46:-1:128
001:PRES  :Pressure                           Pa
002:PMSL  :Pressure reduced to MSL            Pa
003:PTND  :Pressure tendency                  Pa s**-1
004:PVOR  :Potential vorticity                Km**2 kg**-1 s**-1
...


your table format needs to be changed to the standard NWS format of:

3:PTEND:Pressure tendency [Pa/s]


If you send me the the table, I'll add it into the list of tables and
you will not have to go through this process again in later releases.




, and in the "tableslookup.lst" I have:

...
38:     0:     2: beijing_v2.tab
46:     0:   128: inpegrib_glb.tab
54:     0:     2: cmcgem_2.tab
...


this is correct.



Looks like only a few minor mistakes. Let me know if you run into any
problems.

Robb....







Thanks in advanced!

Cheers,

Eduardo.

--


_______________________________________________
decoders mailing list
address@hidden
For list information or to unsubscribe, visit: http://www.unidata.ucar.edu/mailing_lists/

===============================================================================
Robb Kambic                                Unidata Program Center
Software Engineer III                      Univ. Corp for Atmospheric Research
address@hidden             WWW: http://www.unidata.ucar.edu/
===============================================================================





===============================================================================
Robb Kambic                                Unidata Program Center
Software Engineer III                      Univ. Corp for Atmospheric Research
address@hidden             WWW: http://www.unidata.ucar.edu/
===============================================================================



--
Eduardo B. M. Barbosa
Systems Analyst - Database Development Group
National Institute for Space Research - INPE
Center for Weather Forecast and Climate Studies - CPTEC
Rod Presidente Dutra, Km 40 - Cach.Pta., SP - 12630-000
Phone: +55 12 3186-8618           Fax: +55 12 3101-2835

===============================================================================
Robb Kambic                                Unidata Program Center
Software Engineer III                      Univ. Corp for Atmospheric Research
address@hidden             WWW: http://www.unidata.ucar.edu/
===============================================================================



--
Eduardo B. M. Barbosa
Systems Analyst - Database Development Group
National Institute for Space Research - INPE
Center for Weather Forecast and Climate Studies - CPTEC
Rod Presidente Dutra, Km 40 - Cach.Pta., SP - 12630-000
Phone: +55 12 3186-8618           Fax: +55 12 3101-2835