[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20010420: obtain GEMPAK software



>From: Jason Li <address@hidden>
>Organization: UCAR/Unidata
>Keywords: 200104201924.f3KJOaL19868

>--============_-1224327820==_ma============
>Content-Type: text/plain; charset="us-ascii" ; format="flowed"
>
>Unidata Product Licensing Form: 911205
>
>Institution: NASA Goddard Space Flight Center
>
>Department: Climate and Radiation Branch
>
>Mailing address: Code 913, NASA/GSFC
>
>
>Contact name: Jason Li
>
>Phone number(s): (301) 614 6230
>
>Email address: address@hidden
>
>Contract officer:
>
>
>Phone number(s):
>
>Product & Rev #: GEMPAK 5.6
>
>Machine and operating system:  SGI Octane running IRIX 6.5
>
>------------------------------------------------------------------------
>For sites other than U.S. colleges or universities, GEMPAK is 
>available from the National Technology Transfer Center. In some 
>special cases associate membership in Unidata can be awarded to sites 
>other than U.S. colleges and unversities. These situations are judged 
>on a case by case basis. Please contact address@hidden for 
>more information.
>
>
>---------------------------------------------------------------------
>Jason Li                         | Email:address@hidden
>Climate and Radiation Branch     | Tel:  (301) 614 6230
>NASA Goddard Space Flight Center | Fax:  (301) 614 6307
>Greenbelt, MD 20771, USA         | Web:  http://climate.gsfc.nasa.gov
>---------------------------------------------------------------------
>Beauty of style, harmony, grace and good rhythm depend on simplicity.
>--============_-1224327820==_ma============
>Content-Type: text/enriched; charset="us-ascii"
>
><fontfamily><param>Times_New_Roman</param><bigger>Unidata Product
>Licensing Form: 911205
>
>
>Institution: NASA Goddard Space Flight Center
>
>
>Department: Climate and Radiation Branch
>
>
>Mailing address: Code 913, NASA/GSFC   
>
>
>
>Contact name: Jason Li
>
>
>Phone number(s): (301) 614 6230
>
>
>Email address: address@hidden
>
>
>Contract officer:
>
>
>
>Phone number(s): 
>
>
>Product & Rev #: GEMPAK 5.6 
>
>
>Machine and operating system:  SGI Octane running IRIX 6.5
>
>
>------------------------------------------------------------------------
>
>For sites other than U.S. colleges or universities, GEMPAK is available
>from the <underline><color><param>0000,0000,FFFF</param>National
>Technology Transfer Center</color></underline>. In some special cases
>associate membership in Unidata can be awarded to sites other than U.S.
>colleges and unversities. These situations are judged on a case by case
>basis. Please contact address@hidden for more information. 
></bigger></fontfamily>
>
>
>
>---------------------------------------------------------------------
>
>Jason Li                         | Email:address@hidden
>
>Climate and Radiation Branch     | Tel:  (301) 614 6230
>
>NASA Goddard Space Flight Center | Fax:  (301) 614 6307
>
>Greenbelt, MD 20771, USA         | Web:  http://climate.gsfc.nasa.gov
>
>---------------------------------------------------------------------
>
>Beauty of style, harmony, grace and good rhythm depend on simplicity.
>
>--============_-1224327820==_ma============--
>




Jason,

Here is the information for downloading and installing GEMPAK from source. 

The current GEMPAK distribution is GEMPAK 5.6.C.1

---------------------------------------------------------------------
The information you need to download gempak is:
host: ftp.unidata.ucar.edu
login: gbuddy
password: XXXXXX

Please record the above information for your records.

Here are the general source download and building instructions. If
you are running Solaris or Linux, you can download binary distributions
for these platforms. In particular, GEMPAK requires Motif which is not
part of Linux. Third party Motif libraries are available, including openmotif
which I have tested under RedHat Linux 7.0.  Look for the README file in the 
binary download directory for instruction on how to install the binary release.

The source distribution for building is found under
~gbuddy/nawips-5.6/gempak_upc5.6.c.1.tar.gz

To build Gempak from source, download and unpack the distribution into
a clean directory. Edit the csh file Gemenviron in the top directory
and define the NAWIPS environmental variable to be the directory you
unpacked into. Source the Gemenviron variables into your csh
environment to define $NAWIPS and all the tree locations relative to
NAWIPS. Then, if your system is standard configuration for Solaris,
Solaris for Intel (X86) IRIX, OSF/1, AIX, Linux, HPUX- you should be able 
to just type "make all", followed by "make install" when the compilation 
finishes. 
If you have libraries in non-standard places, then the 
$NAWIPS/config/Makeinc.xxxxx
file for your OS would have to be modified. You should not modify the 
optimization levels since some compilers don't work well with aggressive
optimization (Especially Digital UNIX).

Documentation for GEMPAK can be found as PDF files under
the $NAWIPS/doc/User_Guide directory, as well as online at:
http://www.unidata.ucar.edu/packages/gempak/tutorial/
I have provided release notes for GEMPAK 5.6 at:
http://www.unidata.ucar.edu/packages/gempak/GEMPAK5.6/

All users that use Gempak should source Gemenviron into their csh
environment to define the Gempak variables and add the executable
directory into their path. Once the distribution is installed,
you can edit the data directory locations defined in Gemenviron-
but thats not a priority for building.

Plese refer all questions about the distribution and any problems
you may have to address@hidden. You may also wish to
subscribe yourself to the gembud email list at:
http://www.unidata.ucar.edu/mailinglist/mailing-list-form.html

Announcements about the GEMPAK distribution, including new distributions,
patches, and feature enhancements are made through that list. Also,
if you have information or need to find other users who may have
experience with a specific data set, then you are encouraged to
use the email list which is composed of fellow GEMPAK users in our community.

Once you have GEMPAK installed, you can use the "dc" realtime data decoders
with the LDM package to decode the data into GEMPAK format as it arrives
at your site. Refer to the LDM web pages for the installation of LDM and
getting connected to the IDD. Examples of LDM pqact.cont pattern/action entries 
for 
the various types of data for the GEMPAK decoders are found in the tutorial
as well as in the Examples section of the GEMPAK www pages.


Steve Chiswell
Unidata User Support
****************************************************************************
Unidata User Support                                    UCAR Unidata Program
(303)497-8644                                                  P.O. Box 3000
address@hidden                                   Boulder, CO 80307
----------------------------------------------------------------------------
Unidata WWW Service                        http://www.unidata.ucar.edu/     
****************************************************************************