[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20010628: dcgrib errors


Ahhhhhhhh.......

Here you show:
-g /npfos/noaaport/nawips/gempak/tables 


In your ldm pqact.conf action below, you had:
-g /npfos/noaaport/nawips/gempak/tables/grid

Your pqact.conf GEMTBL location should be the level up.

Steve Chiswell
Unidata User SUpport


>From: "Glenn Rutledge" <address@hidden>
>Organization: UCAR/Unidata
>Keywords: 200106281731.f5SHVl107097

>I ran-
>npfos:/npfos/noaaport/ldm->cat  GRID_YORI92_KWBE_20010628_1200 | dcgrib -d
>/npfos/noaaport/nawipsdata/logs/%Y%m%d_dcgrib.log -g
>/npfos/noaaport/nawips/gempak/tables PACK
>/npfos/noaaport/nawipsdata/hds/YYYYMMDDHH_eta@@@.gem
>and it replies-
> Changing center table to cntrgrib1.tbl
> Changing vertical coord table to vcrdgrib1.tbl
> Changing WMO parameter table to wmogrib2.tbl
> Changing center parameter table to ncepgrib2.tbl
>npfos:/npfos/noaaport/ldm->
>
>It created an eta file (franly I did not determine if this was an eta grid or 
> not-
>how is this done with gdinfo? i.e., the command??).
>
>The grid shows up under GARP (unlike the auto ones- they crash the system).  S
> Ince
>I don't know the gdinfo command off hand, I can't quicly plot it up).  It look
> s
>like it works however.  What's next?  Glenn
>
>
>
>Unidata Support wrote:
>
>> Glenn,
>>
>> Have you tried running the grib decoder from the command line as
>> the LDM user with a sample data set like:
>>
>> cat gribfile | dcgrib -d - ....etc....
>>
>> Steve Chiswell
>> Unidata User Support
>>
>> >From: "Glenn Rutledge" <address@hidden>
>> >Organization: UCAR/Unidata
>> >Keywords: 200106281527.f5SFRS101355
>>
>> >Steve-
>> >I doubled checked the umask (2) .  It looks like permissions are OK. and th
> e g
>> > rid
>> >tables are in the propoer location.  I'm at a loss as to why the GEMTBL can
> 't
>> > be
>> >located by the grib decoders.
>> >
>> >Unidata Support wrote:
>> >
>> >> Glenn,
>> >>
>> >> The dcgrib errors in the logs is likely the problem with the grid files
>> >> being used by the GUIs. It says that the decoder can't find the
>> >> $GEMTBL/grid/ directory for the tables. The reasons could be that
>> >> the ldm process does not have permission to look in the
>> >> /npfos/noaaport/nawips/gempak/tables/grid directory.
>> >>
>> >> Or, the /npfos/noaaport/nawips/gempak/tables/grid is not the
>> >> correct $GEMTBL/grid location on your system.
>> >>
>> >> Check as the LDM user to make sure you do have permission to look
>> >> in that directory. It is possible that your user setup or umask
>> >> does not allow that.
>> >>
>> >> I'm assuming if you try to use gdinfo on any of your grid files, you
>> >> won't find any data in the files.
>> >>
>> >> Steve Chiswell
>> >> Unidata User SUpport
>> >>
>> >> >From: "Glenn Rutledge" <address@hidden>
>> >> >Organization: UCAR/Unidata
>> >> >Keywords: 200106261330.f5QDUh116711
>> >>
>> >> >Hi Steve-
>> >> >1) Yes, In yesterday's file I deleted all but one day's worth of grids.
>> >> >2) Yes, I cannot display any models.  btw- in nmap2, I can select files 
> (se
>> > e
>> >> >times), but when I select a time, nothing is selected).
>> >> >
>> >> >I changed the default widget to eta212.  Now, the popup displays nothing
>  be
>> > for
>> >> > e
>> >> >crashing- with a core dump.  I looked into the decoder logs (dcgrib) and
>  se
>> > e:
>> >> >npfos:/npfos/noaaport/nawipsdata/logs->tail  20010626_dcgrib.log
>> >> >Jun 26 13:16:47 dcgrib[20518]: can't open grib tables, set GEMTBL -19
>> >> >Jun 26 13:16:47 dcgrib[20519]: can't open grib tables, set GEMTBL -19
>> >> >Jun 26 13:16:48 dcgrib[20520]: can't open grib tables, set GEMTBL -19
>> >> >Jun 26 13:16:49 dcgrib[20521]: can't open grib tables, set GEMTBL -19
>> >> >Jun 26 13:16:49 dcgrib[20522]: can't open grib tables, set GEMTBL -19
>> >> >Jun 26 13:16:49 dcgrib[20523]: can't open grib tables, set GEMTBL -19
>> >> >Jun 26 13:16:50 dcgrib[20524]: can't open grib tables, set GEMTBL -19
>> >> >Jun 26 13:16:50 dcgrib[20525]: can't...
>> >> >
>> >> >Is this a persmissions pblm?
>> >> >
>> >> >Also, here's my pqact log errors:
>> >> >npfos:/npraid/noaaport/ldm/logs->tail nawips_pqact.log
>> >> >Jun 26 13:22:03 pqact[11548]: child 20759 exited with status 2
>> >> >Jun 26 13:22:03 pqact[11548]: pbuf_flush (3) write: Broken pipe
>> >> >Jun 26 13:22:03 pqact[11548]: pipe_dbufput:
>> >> >/npfos/noaaport/nawips/bin/sol/dcgrib-d/npfos/noaaport/nawipsdata/logs/2
> 001
>> > 062
>> >> > 6_dcgrib.log-g/npfos/noaaport/nawips/gempak/tables/gridPACK/npfos/noaap
> ort
>> > /na
>> >> > wipsdata/hds/YYYYMMDDHH_ruc@@@.gem
>> >> >write error
>> >> >Jun 26 13:22:03 pqact[11548]: pipe_prodput: trying again
>> >> >Jun 26 13:22:03 pqact[11548]: child 20760 exited with status 2
>> >> >Jun 26 13:22:03 pqact[11548]: pbuf_flush (3) write: Broken pipe
>> >> >Jun 26 13:22:03 pqact[11548]: pipe_dbufput:
>> >> >/npfos/noaaport/nawips/bin/sol/dcgrib-d/npfos/noaaport/nawipsdata/logs/2
> 001
>> > 062
>> >> > 6_dcgrib.log-g/npfos/noaaport/nawips/gempak/tables/gridPACK/npfos/noaap
> ort
>> > /na
>> >> > wipsdata/hds/YYYYMMDDHH_ruc@@@.gem
>> >> >write error
>> >> >Jun 26 13:22:03 pqact[11548]: pipe_prodput: trying again
>> >> >Jun 26 13:22:03 pqact[11548]: child 20761 exite..
>> >> >
>> >> >I'll set some logging for garp and get back to you, Thanks, Glenn
>> >> >
>> >> >
>> >> >Unidata Support wrote:
>> >> >
>> >> >> Glenn,
>> >> >>
>> >> >> Off hand, I don't see anything that would be the problem.
>> >> >> How many AVN213 files are in the /npfos/noaaport/nawipsdata/hds/
>> >> >> directory? Your ls only shows 1 day, but the messages are
>> >> >> from further back...though I don't know if that was just
>> >> >> because you sent the message yesterday, and I answered
>> >> >> you back today.
>> >> >>
>> >> >> I'm assuming you can't get any model grids to display.
>> >> >> Do the "too many files open" messages start when you initially
>> >> >> pop up the model window?
>> >> >>
>> >> >> Since you don't have an eta211, you might need to check the
>> >> >> default "model" value, which would be a problem initially
>> >> >> when poping up the window:
>> >> >>
>> >> >> #
>> >> >> # Widget defaults
>> >> >> #
>> >> >> # Choose default values for the model, vertical coordinate, levels,
>> >> >> # function, default fdf chapters, cross-section line, time-height
>> >> >> # station, vertical profile axis types, radar ring station, upper
>> >> >> # air levels and upper air filter.
>> >> >> #
>> >> >> model           : eta211
>> >> >>
>> >> >> After that, I would suggest using the "option" pulldown for logging
>> >> >> to verbosely log all the information about what files are being opened
> .
>> >> >>
>> >> >> Steve CHiswell
>> >> >>
>> >> >> >From: "Glenn Rutledge" <address@hidden>
>> >> >> >Organization: UCAR/Unidata
>> >> >> >Keywords: 200106251742.f5PHg8102532
>> >> >>
>> >> >> >Thanks Steve,
>> >> >> >Yes, that was the first thing I looked at.  Here's the list of models
>  I'
>> > m
>> >> >> >selecting:
>> >> >> >2001062500_avn201.gem  2001062500_thin.gem    2001062512_eta215.gem
>> >> >> >2001062500_avn202.gem  2001062506_avn201.gem  2001062512_ngm213.gem
>> >> >> >2001062500_avn213.gem  2001062506_avn202.gem  2001062512_ruc211.gem
>> >> >> >2001062500_mrf.gem     2001062506_avn213.gem  2001062514_ruc211.gem
>> >> >> >2001062500_mrf202.gem  2001062512_avn202.gem  2001062515_ruc211.gem
>> >> >> >2001062500_ngm213.gem  2001062512_avn213.gem  2001062516_ruc211.gem
>> >> >> >2001062500_spec.gem    2001062512_eta212.gem  2001062517_ruc211.gem
>> >> >> >
>> >> >> >Here's my modelkeys and labels:
>> >> >> >modelkeys : "avn202,avn213,eta212,eta215,mrf202,ngm213,ruc211"
>> >> >> >modellabels : "AVN202,AVN213,Eta,mesoEta,MRF,NGM,RUC"
>> >> >> >
>> >> >> >It looks right to me...
>> >> >> >
>> >> >> >Glenn
>> >> >> >
>> >> >> >Unidata Support wrote:
>> >> >> >
>> >> >> >> Glenn,
>> >> >> >>
>> >> >> >> Make sure your model keys in $GARPHOME/config/Garp_defaults
>> >> >> >> are correct and unique. Eg, make sure the key is "avn213" and
>> >> >> >> not just "avn" if you have other avn201, avn202, etc grids that
>> >> >> >> the key would match. That might be the cause of "too many"
>> >> >> >> files being opened.
>> >> >> >>
>> >> >> >> Steve Chiswell
>> >> >> >> Unidata User Support
>> >> >> >>
>> >> >> >> >From: "Glenn Rutledge" <address@hidden>
>> >> >> >> >Organization: UCAR/Unidata
>> >> >> >> >Keywords: 200106251312.f5PDC5120758
>> >> >> >>
>> >> >> >> >Hello Steve,
>> >> >> >> >Getting nawips (garp) back up.  I have two pblms at the moment:
>> >> >> >> >1) some err msg about Whoa!!! and the other
>> >> >> >> >2) can't get at my grids.  Here's the errors.  Any thoughts?  Thx,
>  Gl
>> > enn
>> >> >> >> >
>> >> >> >> >npfos:/npraid/noaaport/nawipsdata/hds->ntl
>> >> >> >> >Resource File:  /npfos/noaaport/nawips/resource/Ntop
>> >> >> >> >graphic, satellite, radar -- 33 95 20
>> >> >> >> > Invoke ... /npfos/noaaport/nawips/bin/sol/garp
>> >> >> >> >G A R P - v2.1 starting...
>> >> >> >> >!!!!!Whoa!!!!!!  Free() got a 0x0
>> >> >> >> >GEMPAK: [DM -3]  Too many files open.
>> >> >> >> >GEMPAK: [GD -2]  File
>> >> >> >> >/npfos/noaaport/nawipsdata/hds/2001062318_avn213.gem cannot be ope
> ned
>> > .
>> >> >> >> >GEMPAK: [DM -3]  Too many files open.
>> >> >> >> >GEMPAK: [GD -2]  File
>> >> >> >> >/npfos/noaaport/nawipsdata/hds/2001062400_avn213.gem cannot be ope
> ned
>> > .
>> >> >> >> >GEMPAK: [DM -3]  Too many files open.
>> >> >> >> >GEMPAK: [GD -2]  File
>> >> >> >> >/npfos/noaaport/nawipsdata/hds/2001062406_avn213.gem cannot be ope
> ned
>> > .
>> >> >> >> >GEMPAK: [DM -3]  Too many files open.
>> >> >> >> >GEMPAK: [GD -2]  File
>> >> >> >> >/npfos/noaaport/nawipsdata/hds/2001062412_avn213.gem cannot be ope
> ned
>> > .
>> >> >> >> >GEMPAK: [DM -3]  Too many files open.
>> >> >> >> >GEMPAK: [GD -2]  File
>> >> >> >> >/npfos/noaaport/nawipsdata/hds/2001062418_avn213.gem cannot be ope
> ned
>> > .
>> >> >> >> >GEMPAK: [DM -3]  Too many files open.
>> >> >> >> >GEMPAK: [GD -2]  File
>> >> >> >> >/npfos/noaaport/nawipsdata/hds/2001062500_avn213.gem cannot be ope
> ned
>> > .
>> >> >> >> >
>> >> >> >> >
>> >> >> >>
>> >> >> >> *******************************************************************
> ***
>> > ***
>> >> > ***
>> >> >> >> Unidata User Support                                    UCAR Unidat
> a P
>> > rog
>> >> > ram
>> >> >> >> (303)497-8644                                                  P.O.
>  Bo
>> > x 3
>> >> > 000
>> >> >> >> address@hidden                                   Boulder,
>  CO
>> >  80
>> >> > 307
>> >> >> >> -------------------------------------------------------------------
> ---
>> > ---
>> >> > ---
>> >> >> >> Unidata WWW Service                       http://www.unidata.ucar.e
> du
>> > /
>> >> >> >> *******************************************************************
> ***
>> > ***
>> >> > ***
>> >> >> >
>> >> >>
>> >> >> **********************************************************************
> ***
>> > ***
>> >> >> Unidata User Support                                    UCAR Unidata P
> rog
>> > ram
>> >> >> (303)497-8644                                                  P.O. Bo
> x 3
>> > 000
>> >> >> address@hidden                                   Boulder, CO
>  80
>> > 307
>> >> >> ----------------------------------------------------------------------
> ---
>> > ---
>> >> >> Unidata WWW Service                       http://www.unidata.ucar.edu/
>> >> >> **********************************************************************
> ***
>> > ***
>> >> >
>> >>
>> >> *************************************************************************
> ***
>> >> Unidata User Support                                    UCAR Unidata Prog
> ram
>> >> (303)497-8644                                                  P.O. Box 3
> 000
>> >> address@hidden                                   Boulder, CO 80
> 307
>> >> -------------------------------------------------------------------------
> ---
>> >> Unidata WWW Service                       http://www.unidata.ucar.edu/
>> >> *************************************************************************
> ***
>> >
>>
>> ****************************************************************************
>> Unidata User Support                                    UCAR Unidata Program
>> (303)497-8644                                                  P.O. Box 3000
>> address@hidden                                   Boulder, CO 80307
>> ----------------------------------------------------------------------------
>> Unidata WWW Service                       http://www.unidata.ucar.edu/      
>> ****************************************************************************
>