[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20010710: GEMPAK download information



>From: Brendon Hoch <address@hidden>
>Organization: UCAR/Unidata
>Keywords: 200107101423.f6AENh118391

>Unidata Product Licensing Form: 911205
>
>Institution: Lamont-Doherty Earth Observatory/Columbia University
>
>Department: International Reasearch Institute for climate prediction
>(IRI)
>
>Mailing address: 61 Route 9W
>
>
>Contact name: Brendon Hoch
>
>Phone number(s): 845-680-4444
>
>Email address: address@hidden
>
>Contract officer: (same)
>
>
>Phone number(s): 
>
>Product & Rev #: GEMPAK 5.6 
>
>Machine and operating system: Red Hat Linux 7.1
>
>Thanks,
>Brendon Hoch
>-- 
>_______________________________________________________
>Brendon Hoch
>International Research Institute for climate prediction
>Lamont Doherty Earth Observatory of Columbia University
>141/208 Monell, 61 Route 9W, Palisades, NY 10964
>-------------------------------------------------------
>Phone: (845)680-4444 Fax:(845)680-4488
>mailto:address@hidden
>http://iri.columbia.edu/~bhoch
>-------------------------------------------------------
>



Brendon,

I will send you the FTP download instructions for GEMPAK.
We will be moving to an online Web based download system
in the near future.

The current version of GEMPAK is 5.6.C.1. This will be replaced
by GEMPAK 5.6.D.1 shortly.

You can obtain either source or binary installations of GEMPAK.
I have binary distributions for Linux and Solaris platforms. We
support IRIX, HP-UX, OSF/1 (Digital Unix), AIX, Solaris, Solaris X86
and Linux source build installations as well.

Download and installation instructions for our release of software,
as well as tutorial information via the web pages:
http://www.unidata.ucar.edu/packages/gempak/GEMPAK5.6/.

If you need the binary installation instructions for Linux or Solaris,
you can find them in the README file in the ~gbuddy/nawips-5.6/binary/(OSname)
directory. The binary tree is found under the general GEMPAK distribution tree,
which I will provide the login information and source building instructions
below. 

Here is the information for downloading and installing GEMPAK from source. 

The current GEMPAK distribution is GEMPAK 5.6.C.1

---------------------------------------------------------------------
The information you need to download gempak is:
host: ftp.unidata.ucar.edu
login: gbuddy
password: XXXXXX

Please record the above information for your records.

Here are the general source download and building instructions. If
you are running Solaris or Linux, you can download binary distributions
for these platforms. In particular, GEMPAK requires Motif which is not
part of Linux. Third party Motif libraries are available, including openmotif
which I have tested under RedHat Linux 7.0.  Look for the README file in the 
binary download directory for instruction on how to install the binary release.

The source distribution for building is found under
~gbuddy/nawips-5.6/gempak_upc5.6.c.1.tar.gz

To build Gempak from source, download and unpack the distribution into
a clean directory. Edit the csh file Gemenviron in the top directory
and define the NAWIPS environmental variable to be the directory you
unpacked into. Source the Gemenviron variables into your csh
environment to define $NAWIPS and all the tree locations relative to
NAWIPS. Then, if your system is standard configuration for Solaris,
Solaris for Intel (X86) IRIX, OSF/1, AIX, Linux, HPUX- you should be able 
to just type "make all", followed by "make install" when the compilation 
finishes. 
If you have libraries in non-standard places, then the 
$NAWIPS/config/Makeinc.xxxxx
file for your OS would have to be modified. You should not modify the 
optimization levels since some compilers don't work well with aggressive
optimization (Especially Digital UNIX).

Documentation for GEMPAK can be found as PDF files under
the $NAWIPS/doc/User_Guide directory, as well as online at:
http://www.unidata.ucar.edu/packages/gempak/tutorial/
I have provided release notes for GEMPAK 5.6 at:
http://www.unidata.ucar.edu/packages/gempak/GEMPAK5.6/

All users that use Gempak should source Gemenviron into their csh
environment to define the Gempak variables and add the executable
directory into their path. Once the distribution is installed,
you can edit the data directory locations defined in Gemenviron-
but thats not a priority for building.

Plese refer all questions about the distribution and any problems
you may have to address@hidden. You may also wish to
subscribe yourself to the gembud email list at:
http://www.unidata.ucar.edu/mailinglist/mailing-list-form.html

Announcements about the GEMPAK distribution, including new distributions,
patches, and feature enhancements are made through that list. Also,
if you have information or need to find other users who may have
experience with a specific data set, then you are encouraged to
use the email list which is composed of fellow GEMPAK users in our community.

Once you have GEMPAK installed, you can use the "dc" realtime data decoders
with the LDM package to decode the data into GEMPAK format as it arrives
at your site. Refer to the LDM web pages for the installation of LDM and
getting connected to the IDD. Examples of LDM pqact.cont pattern/action entries 
for 
the various types of data for the GEMPAK decoders are found in the tutorial
as well as in the Examples section of the GEMPAK www pages.


Steve Chiswell
Unidata User Support