[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20010815: Problems allocating colors



Bob,

You probably need to go into linuxconfig and select an 8 bit depth
visual (256 colors) and unselect any 16 or 24 bit visuals you have selected.

The error message you show is typical of running an X server (Xfree86)
not in 8 bit mode.

If you find that you really need the true color visual for other applications,
then Mike Leuthold at Arizona sent a message in the support archives
mentioning that he runs 2 X servers (using the the ctrl-alt-f7/f8
hot toggle between the). He can then have his 8 bit visuals for GEMPAK and 
32 bit visuals for other applications.

Also, with KDE, I set all those icon colors to gray instead of the 
high color use mode that is the default: 
http://www.unidata.ucar.edu/packages/gempak/tutorial/gifs/linux_kde1.gif

Steve Chiswell
Unidata User Support



>From: Robert Leche <address@hidden>
>Organization: UCAR/Unidata
>Keywords: 200108151524.f7FFO0118284

>This is a multi-part message in MIME format.
>--------------1B7E907DE1BAF4C243A622E2
>Content-Type: multipart/alternative;
> boundary="------------B382FEA587F476391AE3DFEB"
>
>
>--------------B382FEA587F476391AE3DFEB
>Content-Type: text/plain; charset=x-user-defined
>Content-Transfer-Encoding: 7bit
>
>Hello all,
>Returning from the Gempak workshop, I am eager to install the Gempak
>tools on our systems but I ran into a problem. The computer, Sirocco
>(was Nafhat), was upgraded to Redhat 7.1 with KDE installed. Currently
>when I attempt to start ntl, it errors out (with no Netscape sessions
>running):
>
>         ========================================
>
>[rleche@sirocco linux]$ ./ntl -s32 &
>[1] 4305
>[rleche@sirocco linux]$ Resource File:
>/home/gempak/GEMPAK5.6/resource/Ntop
>graphic, satellite, radar -- 33 95 20
>         Request total # of colors = 148
>X Error of failed request:  BadValue (integer parameter out of range for
>operati
>on)
>  Major opcode of failed request:  86 (X_AllocColorCells)
>  Value in failed request:  0x0
>  Serial number of failed request:  392
>  Current serial number in output stream:  392
>
>[rleche@sirocco linux]$ ./freeColors
>
>                        CURRENTLY YOUR SYSTEM HAS:
>                ========================================
>                    256 total color cells.
>                    0 free  color cells.
>                    256 shared read-only color cells.
>                    0 private writeable color cells.
>                ========================================
>
>[rleche@sirocco linux]$ ./ntl -s32 -v &
>[1] 4317
>[rleche@sirocco linux]$ Resource File:
>/home/gempak/GEMPAK5.6/resource/Ntop
>graphic, satellite, radar -- 33 95 20
>nbank -- 3
>banks[0] = 33
>banks[1] = 95
>banks[2] = 20
>         Request total # of colors = 148
>X Error of failed request:  BadValue (integer parameter out of range for
>operation)
>  Major opcode of failed request:  86 (X_AllocColorCells)
>  Value in failed request:  0x0
>  Serial number of failed request:  392
>  Current serial number in output stream:  392
>
>[1]    Exit 1                        ./ntl -s32 -v
>[rleche@sirocco linux]$Distribution:                  Red Hat Linux
>
>The following table lists Sirocco system info.
>
>==============================================================================
> ===================
>
>Operating System:              Linux
>Distribution Version:          Red Hat Linux release 7.1 (Seawolf)
>
>Operating System Version:      #1 Sun Apr 8 20:41:30 EDT 2001
>Operating System Release:      2.4.2-2
>Processor Type:                i686
>Host Name:                     sirocco.srcc.lsu.edu
>User Name:                     rleche
>X Display Name:                :0.0
>System Status:                 9:56am  up 1 day, 55 min,  6 users,  load
>average: 0.36, 0.23, 0.33
>==============================================================================
> ====================
>
>If this is a hardware problem, I attached a copy of the XF86Config file
>to this email.  I am using  1600x1200 24bit video mode. The hi-lights of
>the XF86Config file are:
>
>Section "Screen"
>    Driver      "svga"
>    # Use Device "Generic VGA" for Standard VGA 320x200x256
>    #Device      "Generic VGA"
>    Device      "nVidia Corporation|Riva TNT2 Model 64"
>    Monitor     "SGI 20-inch GDM-20E21"
>    Subsection "Display"
>        Depth       32
>        Modes       "1600x1200"
>        ViewPort    0 0
>    EndSubsection
>EndSection
>
># The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32,
>Mach64# I128, and S3V)
>Section "Screen"
>    Driver      "accel"
>    Device      "nVidia Corporation|Riva TNT2 Model 64"
>    Monitor     "SGI 20-inch GDM-20E21"
>    Subsection "Display"
>        Depth       32
>        Modes       "1600x1200"
>        ViewPort    0 0
>    EndSubsection
>EndSection
>
>Ideas ? Suggestions?
>
>
>
>Bob
>address@hidden
>225 578 5023
>
>
>--------------B382FEA587F476391AE3DFEB
>Content-Type: text/html; charset=x-user-defined
>Content-Transfer-Encoding: 7bit
>
><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
><html>
><font color="#FF0000">Hello all,</font>
><br><font color="#FF0000">Returning from the Gempak workshop, I am eager
>to install the Gempak tools on our systems but I ran into a problem. The
>computer, Sirocco (was Nafhat), was upgraded to Redhat 7.1 with KDE installed.
>Currently when I attempt to start ntl, it errors out (with no Netscape
>sessions running):&nbsp;</font>
><p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ==========================
> ==============
><br>&nbsp;
><br>[rleche@sirocco linux]$ ./ntl -s32 &amp;
><br>[1] 4305
><br>[rleche@sirocco linux]$ Resource File:&nbsp; /home/gempak/GEMPAK5.6/resour
> ce/Ntop
><br>graphic, satellite, radar -- 33 95 20
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Request total # of
>colors = 148
><br>X Error of failed request:&nbsp; BadValue (integer parameter out of
>range for operati
><br>on)
><br>&nbsp; Major opcode of failed request:&nbsp; 86 (X_AllocColorCells)
><br>&nbsp; Value in failed request:&nbsp; 0x0
><br>&nbsp; Serial number of failed request:&nbsp; 392
><br>&nbsp; Current serial number in output stream:&nbsp; 392
><p>[rleche@sirocco linux]$ ./freeColors
><br>&nbsp;
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n
> bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
>CURRENTLY YOUR SYSTEM HAS:
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n
> bsp;&nbsp;&nbsp;
>========================================
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n
> bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
>256 total color cells.
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n
> bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
>0 free&nbsp; color cells.
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n
> bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
>256 shared read-only color cells.
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n
> bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
>0 private writeable color cells.
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n
> bsp;&nbsp;&nbsp;
>========================================
><br>&nbsp;
><br>[rleche@sirocco linux]$ ./ntl -s32 -v &amp;
><br>[1] 4317
><br>[rleche@sirocco linux]$ Resource File:&nbsp; /home/gempak/GEMPAK5.6/resour
> ce/Ntop
><br>graphic, satellite, radar -- 33 95 20
><br>nbank -- 3
><br>banks[0] = 33
><br>banks[1] = 95
><br>banks[2] = 20
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Request total # of
>colors = 148
><br>X Error of failed request:&nbsp; BadValue (integer parameter out of
>range for operation)
><br>&nbsp; Major opcode of failed request:&nbsp; 86 (X_AllocColorCells)
><br>&nbsp; Value in failed request:&nbsp; 0x0
><br>&nbsp; Serial number of failed request:&nbsp; 392
><br>&nbsp; Current serial number in output stream:&nbsp; 392
><br>&nbsp;
><br>[1]&nbsp;&nbsp;&nbsp; Exit 1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs
> p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nb
> sp;&nbsp;&nbsp;
>./ntl -s32 -v
><br>[rleche@sirocco linux]$Distribution:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n
> bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
>Red Hat Linux
><p><font color="#FF0000">The following table lists Sirocco system info.</font>
><p>===========================================================================
> ======================
><br>Operating System:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nb
> sp;&nbsp;&nbsp;&nbsp;
>Linux
><br>Distribution Version:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp
> ;
>Red Hat Linux release 7.1 (Seawolf)
><br>&nbsp;
><br>Operating System Version:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; #1 Sun Apr
>8 20:41:30 EDT 2001
><br>Operating System Release:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2.4.2-2
><br>Processor Type:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp
> ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
>i686
><br>Host Name:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs
> p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
>sirocco.srcc.lsu.edu
><br>User Name:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs
> p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
>rleche
><br>X Display Name:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp
> ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
>:0.0
><br>System Status:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
>9:56am&nbsp; up 1 day, 55 min,&nbsp; 6 users,&nbsp; load average: 0.36,
>0.23, 0.33
><br>==========================================================================
> ========================
><p><font color="#FF0000">If this is a hardware problem, I attached a copy
>of the XF86Config file to this email.&nbsp; I am using&nbsp; 1600x1200
>24bit video mode. The hi-lights of the XF86Config file are:</font>
><p>Section "Screen"
><br>&nbsp;&nbsp;&nbsp; Driver&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; "svga"
><br>&nbsp;&nbsp;&nbsp; # Use Device "Generic VGA" for Standard VGA 320x200x256
><br>&nbsp;&nbsp;&nbsp; #Device&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; "Generic VGA"
><br>&nbsp;&nbsp;&nbsp; Device&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; "<font color="#FF0
> 000">nVidia
>Corporation|Riva TNT2 Model 64</font>"
><br>&nbsp;&nbsp;&nbsp; Monitor&nbsp;&nbsp;&nbsp;&nbsp; "<font color="#FF0000">
> SGI
20-inch GDM-20E21"</font>
><br>&nbsp;&nbsp;&nbsp; Subsection "Display"
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Depth&nbsp;&nbsp;&nbsp;&nbsp;&n
> bsp;&nbsp;
>32
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Modes&nbsp;&nbsp;&nbsp;&nbsp;&n
> bsp;&nbsp;
>"1600x1200"
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ViewPort&nbsp;&nbsp;&nbsp;
>0 0
><br>&nbsp;&nbsp;&nbsp; EndSubsection
><br>EndSection
><p># The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32,
>Mach64# I128, and S3V)
><br>Section "Screen"
><br>&nbsp;&nbsp;&nbsp; Driver&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; "accel"
><br>&nbsp;&nbsp;&nbsp; Device&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; "nVidia Corporatio
> n|Riva
>TNT2 Model 64"
><br>&nbsp;&nbsp;&nbsp; Monitor&nbsp;&nbsp;&nbsp;&nbsp; "SGI 20-inch GDM-20E21"
><br>&nbsp;&nbsp;&nbsp; Subsection "Display"
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Depth&nbsp;&nbsp;&nbsp;&nbsp;&n
> bsp;&nbsp;
>32
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Modes&nbsp;&nbsp;&nbsp;&nbsp;&n
> bsp;&nbsp;
>"1600x1200"
><br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ViewPort&nbsp;&nbsp;&nbsp;
>0 0
><br>&nbsp;&nbsp;&nbsp; EndSubsection
><br>EndSection<font color="#FF0000"></font>
><p><font color="#FF0000">Ideas ? Suggestions?</font>
><br><font color="#FF0000"></font>&nbsp;
><br><font color="#FF0000"></font>&nbsp;<font color="#FF0000"></font>
><p><font color="#FF0000">Bob</font>
><br><font color="#FF0000">address@hidden</font>
><br><font color="#FF0000">225 578 5023</font>
><br><font color="#FF0000"></font>&nbsp;</html>
>
>--------------B382FEA587F476391AE3DFEB--
>
>--------------1B7E907DE1BAF4C243A622E2
>Content-Type: text/plain; charset=x-user-defined;
> name="XF86Config"
>Content-Transfer-Encoding: 7bit
>Content-Disposition: inline;
> filename="XF86Config"
>
># File generated by XConfigurator.
>
># **********************************************************************
># Refer to the XF86Config(4/5) man page for details about the format of 
># this file.
># **********************************************************************
>
># **********************************************************************
># Files section.  This allows default font and rgb paths to be set
># **********************************************************************
>
>Section "Files"
>
># The location of the RGB database.  Note, this is the name of the
># file minus the extension (like ".txt" or ".db").  There is normally
># no need to change the default.
>
>    RgbPath    "/usr/X11R6/lib/X11/rgb"
>
># Multiple FontPath entries are allowed (they are concatenated together)
># By default, Red Hat 6.0 and later now use a font server independent of
># the X server to render fonts.
>
>    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType"
>    FontPath   "unix/:7100"
>
>EndSection
>
># **********************************************************************
># Server flags section.
># **********************************************************************
>
>Section "ServerFlags"
>
>    # Uncomment this to cause a core dump at the spot where a signal is 
>    # received.  This may leave the console in an unusable state, but may
>    # provide a better stack trace in the core dump to aid in debugging
>    #NoTrapSignals
>
>    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
>    # This allows clients to receive this key event.
>    #DontZap
>
>    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
>    # sequences.  This allows clients to receive these key events.
>    #DontZoom
>
>EndSection
>
># **********************************************************************
># Input devices
># **********************************************************************
>
># **********************************************************************
># Keyboard section
># **********************************************************************
>
>Section "Keyboard"
>
>    Protocol    "Standard"
>
>    # when using XQUEUE, comment out the above line, and uncomment the
>    # following line
>    #Protocol   "Xqueue"
>
>    AutoRepeat  500 5
>
>    # Let the server do the NumLock processing.  This should only be 
>    # required when using pre-R6 clients
>    #ServerNumLock
>
>    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
>    #Xleds      1 2 3
>
>    #To set the LeftAlt to Meta, RightAlt key to ModeShift, 
>    #RightCtl key to Compose, and ScrollLock key to ModeLock:
>
>    LeftAlt        Meta
>    RightAlt        Meta
>   ScrollLock      Compose
>   RightCtl        Control
>
># To disable the XKEYBOARD extension, uncomment XkbDisable.
>
>#    XkbDisable
>
># To customise the XKB settings to suit your keyboard, modify the
># lines below (which are the defaults).  For example, for a non-U.S.
># keyboard, you will probably want to use:
>#    XkbModel    "pc102"
># If you have a US Microsoft Natural keyboard, you can use:
>#    XkbModel    "microsoft"
>#
># Then to change the language, change the Layout setting.
># For example, a german layout can be obtained with:
>#    XkbLayout   "de"
># or:
>#    XkbLayout   "de"
>#    XkbVariant  "nodeadkeys"
>#
># If you'd like to switch the positions of your capslock and
># control keys, use:
>#    XkbOptions  "ctrl:swapcaps"
>
># These are the default XKB settings for XFree86
>#    XkbRules    "xfree86"
>#    XkbModel    "pc101"
>#    XkbLayout   "us"
>#    XkbVariant  ""
>#    XkbOptions  ""
>
>   XkbKeycodes     "xfree86"
>   XkbTypes        "default"
>   XkbCompat       "default"
>   XkbSymbols      "us(pc101)"
>   XkbGeometry     "pc"
>   XkbRules        "xfree86"
>   XkbModel        "pc101"
>    XkbLayout       "us"
>EndSection
>
># **********************************************************************
># Pointer section
># **********************************************************************
>
>Section "Pointer"
>    Protocol    "IMPS/2"
>    Device      "/dev/mouse"
>    ZAxisMapping 4 5
>
># When using XQUEUE, comment out the above two lines, and uncomment
># the following line.
>
>#    Protocol  "Xqueue"
>
># Baudrate and SampleRate are only for some Logitech mice
>
>#    BaudRate  9600
>#    SampleRate        150
>
># Emulate3Buttons is an option for 2-button Microsoft mice
># Emulate3Timeout is the timeout in milliseconds (default is 50ms)
>
>#    Emulate3Buttons
>#    Emulate3Timeout    50
>
># ChordMiddle is an option for some 3-button Logitech mice
>
>#    ChordMiddle
>
>EndSection
>
>
># **********************************************************************
># Monitor section
># **********************************************************************
>
># Any number of monitor sections may be present
>
>Section "Monitor"
>
>    Identifier  "SGI 20-inch GDM-20E21"
>    VendorName  "Unknown"
>    ModelName   "Unknown"
>
># HorizSync is in kHz unless units are specified.
># HorizSync may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>
>    HorizSync   30.0-96.0
>
># VertRefresh is in Hz unless units are specified.
># VertRefresh may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>
>    VertRefresh 48.0-160.0
>
># Modes can be specified in two formats.  A compact one-line format, or
># a multi-line format.
>
># These two are equivalent
>
>#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
>
>#    Mode "1024x768i"
>#        DotClock      45
>#        HTimings      1024 1048 1208 1264
>#        VTimings      768 776 784 817
>#        Flags         "Interlace"
>#    EndMode
>
># This is a set of standard mode timings. Modes that are out of monitor spec
># are automatically deleted by the server (provided the HorizSync and
># VertRefresh lines are correct), so there's no immediate need to
># delete mode timings (unless particular mode timings don't work on your
># monitor). With these modes, the best standard mode that your monitor
># and video card can support for a given resolution is automatically
># used.
>
># 640x400 @ 70 Hz, 31.5 kHz hsync
>Modeline "640x400"     25.175 640  664  760  800   400  409  411  450
># 640x480 @ 60 Hz, 31.5 kHz hsync
>Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
># 800x600 @ 56 Hz, 35.15 kHz hsync
>ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
># 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
>Modeline "1024x768"    44.9  1024 1048 1208 1264   768  776  784  817 Interlac
> e
>
># 640x400 @ 85 Hz, 37.86 kHz hsync
>Modeline "640x400"     31.5   640  672 736   832   400  401  404  445 -HSync +
> VSync
># 640x480 @ 72 Hz, 36.5 kHz hsync
>Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
># 640x480 @ 75 Hz, 37.50 kHz hsync
>ModeLine  "640x480"    31.5   640  656  720  840   480  481  484  500 -HSync -
> VSync
># 800x600 @ 60 Hz, 37.8 kHz hsync
>Modeline "800x600"     40     800  840  968 1056   600  601  605  628 +hsync +
> vsync
>
># 640x480 @ 85 Hz, 43.27 kHz hsync
>Modeline "640x480"     36     640  696  752  832   480  481  484  509 -HSync -
> VSync
># 1152x864 @ 89 Hz interlaced, 44 kHz hsync
>ModeLine "1152x864"    65    1152 1168 1384 1480   864  865  875  985 Interlac
> e
>
># 800x600 @ 72 Hz, 48.0 kHz hsync
>Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +
> vsync
># 1024x768 @ 60 Hz, 48.4 kHz hsync
>Modeline "1024x768"    65    1024 1032 1176 1344   768  771  777  806 -hsync -
> vsync
>
># 640x480 @ 100 Hz, 53.01 kHz hsync
>Modeline "640x480"     45.8   640  672  768  864   480  488  494  530 -HSync -
> VSync
># 1152x864 @ 60 Hz, 53.5 kHz hsync
>Modeline  "1152x864"   89.9  1152 1216 1472 1680   864  868  876  892 -HSync -
> VSync
># 800x600 @ 85 Hz, 55.84 kHz hsync
>Modeline  "800x600"    60.75  800  864  928 1088   600  616  621  657 -HSync -
> VSync
>
># 1024x768 @ 70 Hz, 56.5 kHz hsync
>Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777  806 -hsync -
> vsync
># 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
>Modeline "1280x1024"   80    1280 1296 1512 1568  1024 1025 1037 1165 Interlac
> e
>
># 800x600 @ 100 Hz, 64.02 kHz hsync
>Modeline  "800x600"    69.65  800  864  928 1088   600  604  610  640 -HSync -
> VSync
># 1024x768 @ 76 Hz, 62.5 kHz hsync
>Modeline "1024x768"    85    1024 1032 1152 1360   768  784  787  823
># 1152x864 @ 70 Hz, 62.4 kHz hsync
>Modeline  "1152x864"   92    1152 1208 1368 1474   864  865  875  895
># 1280x1024 @ 61 Hz, 64.2 kHz hsync
>Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054
>
># 1024x768 @ 85 Hz, 70.24 kHz hsync
>Modeline "1024x768"   98.9  1024 1056 1216 1408   768 782 788 822 -HSync -VSyn
> c
># 1152x864 @ 78 Hz, 70.8 kHz hsync
>Modeline "1152x864"   110   1152 1240 1324 1552   864  864  876  908
>
># 1280x1024 @ 70 Hz, 74.59 kHz hsync
>Modeline "1280x1024"  126.5 1280 1312 1472 1696  1024 1032 1040 1068 -HSync -V
> Sync
># 1600x1200 @ 60Hz, 75.00 kHz hsync
>Modeline "1600x1200"  162   1600 1664 1856 2160  1200 1201 1204 1250 +HSync +V
> Sync
># 1152x864 @ 84 Hz, 76.0 kHz hsync
>Modeline "1152x864"   135    1152 1464 1592 1776   864  864  876  908
>
># 1280x1024 @ 74 Hz, 78.85 kHz hsync
>Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064
>
># 1024x768 @ 100Hz, 80.21 kHz hsync
>Modeline "1024x768"   115.5  1024 1056 1248 1440  768  771  781  802 -HSync -V
> Sync
># 1280x1024 @ 76 Hz, 81.13 kHz hsync
>Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064
>
># 1600x1200 @ 70 Hz, 87.50 kHz hsync
>Modeline "1600x1200"  189    1600 1664 1856 2160  1200 1201 1204 1250 -HSync -
> VSync
># 1152x864 @ 100 Hz, 89.62 kHz hsync
>Modeline "1152x864"   137.65 1152 1184 1312 1536   864  866  885  902 -HSync -
> VSync
># 1280x1024 @ 85 Hz, 91.15 kHz hsync
>Modeline "1280x1024"  157.5  1280 1344 1504 1728  1024 1025 1028 1072 +HSync +
> VSync
># 1600x1200 @ 75 Hz, 93.75 kHz hsync
>Modeline "1600x1200"  202.5  1600 1664 1856 2160  1200 1201 1204 1250 +HSync +
> VSync
># 1600x1200 @ 85 Hz, 105.77 kHz hsync
>Modeline "1600x1200"  220    1600 1616 1808 2080  1200 1204 1207 1244 +HSync +
> VSync
># 1280x1024 @ 100 Hz, 107.16 kHz hsync
>Modeline "1280x1024"  181.75 1280 1312 1440 1696  1024 1031 1046 1072 -HSync -
> VSync
>
># 1800x1440 @ 64Hz, 96.15 kHz hsync 
>ModeLine "1800X1440"  230    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +V
> Sync
># 1800x1440 @ 70Hz, 104.52 kHz hsync 
>ModeLine "1800X1440"  250    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +V
> Sync
>
># 512x384 @ 78 Hz, 31.50 kHz hsync
>Modeline "512x384"    20.160 512  528  592  640   384  385  388  404 -HSync -V
> Sync
># 512x384 @ 85 Hz, 34.38 kHz hsync
>Modeline "512x384"    22     512  528  592  640   384  385  388  404 -HSync -V
> Sync
>
># Low-res Doublescan modes
># If your chipset does not support doublescan, you get a 'squashed'
># resolution like 320x400.
>
># 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
>Modeline "320x200"     12.588 320  336  384  400   200  204  205  225 Doublesc
> an
># 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
>Modeline "320x240"     12.588 320  336  384  400   240  245  246  262 Doublesc
> an
># 320x240 @ 72 Hz, 36.5 kHz hsync
>Modeline "320x240"     15.750 320  336  384  400   240  244  246  262 Doublesc
> an
># 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
>ModeLine "400x300"     18     400  416  448  512   300  301  302  312 Doublesc
> an
># 400x300 @ 60 Hz, 37.8 kHz hsync
>Modeline "400x300"     20     400  416  480  528   300  301  303  314 Doublesc
> an
># 400x300 @ 72 Hz, 48.0 kHz hsync
>Modeline "400x300"     25     400  424  488  520   300  319  322  333 Doublesc
> an
># 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
>ModeLine "480x300"     21.656 480  496  536  616   300  301  302  312 Doublesc
> an
># 480x300 @ 60 Hz, 37.8 kHz hsync
>Modeline "480x300"     23.890 480  496  576  632   300  301  303  314 Doublesc
> an
># 480x300 @ 63 Hz, 39.6 kHz hsync
>Modeline "480x300"     25     480  496  576  632   300  301  303  314 Doublesc
> an
># 480x300 @ 72 Hz, 48.0 kHz hsync
>Modeline "480x300"     29.952 480  504  584  624   300  319  322  333 Doublesc
> an
>
>EndSection
>
>
># **********************************************************************
># Graphics device section
># **********************************************************************
>
># Any number of graphics device sections may be present
>
>Section "Device"
>    Identifier        "Generic VGA"
>    VendorName        "Unknown"
>    BoardName "Unknown"
>    Chipset   "generic"
>
>#    VideoRam 256
>
>#    Clocks   25.2 28.3
>
>EndSection
>
># Device configured by Xconfigurator:
>
>Section "Device"
>    Identifier  "nVidia Corporation|Riva TNT2 Model 64"
>    VendorName  "Unknown"
>    BoardName   "Unknown"
>    #VideoRam    32640
>    # Insert Clocks lines here if appropriate
>EndSection
>
>
># **********************************************************************
># Screen sections
># **********************************************************************
>
># The Colour SVGA server
>
>Section "Screen"
>    Driver      "svga"
>    # Use Device "Generic VGA" for Standard VGA 320x200x256
>    #Device      "Generic VGA"
>    Device      "nVidia Corporation|Riva TNT2 Model 64"
>    Monitor     "SGI 20-inch GDM-20E21"
>    Subsection "Display"
>        Depth       32
>        Modes       "1600x1200"
>        ViewPort    0 0
>    EndSubsection
>EndSection
>
># The 16-color VGA server
>
>Section "Screen"
>    Driver      "vga16"
>    Device      "Generic VGA"
>    Monitor     "SGI 20-inch GDM-20E21"
>    Subsection "Display"
>        Modes       "640x480" "800x600"
>        ViewPort    0 0
>    EndSubsection
>EndSection
>
># The Mono server
>
>Section "Screen"
>    Driver      "vga2"
>    Device      "Generic VGA"
>    Monitor     "SGI 20-inch GDM-20E21"
>    Subsection "Display"
>        Modes       "640x480" "800x600"
>        ViewPort    0 0
>    EndSubsection
>EndSection
>
># The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64
># I128, and S3V)
>Section "Screen"
>    Driver      "accel"
>    Device      "nVidia Corporation|Riva TNT2 Model 64"
>    Monitor     "SGI 20-inch GDM-20E21"
>    Subsection "Display"
>        Depth       32
>        Modes       "1600x1200"
>        ViewPort    0 0
>    EndSubsection
>EndSection
>
>
>--------------1B7E907DE1BAF4C243A622E2--
>