[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 20051003: Compiling GEMPAK in FC4



--- Begin Message ---
  • Subject: Re: 20051003: Compiling GEMPAK in FC4
  • Date: Thu, 13 Oct 2005 09:17:05 -0400
The cause of the problem with g77 was probably a kernel problem.
Running: 'yum update' and rebooting fixed the problems!!!

2005/10/4, Christian Pagé <address@hidden>:
> Steve,
>
> There is definitively a problem with our g77, but with the -g flag, it
> works nicely... It was installed using yum, so it should be quite a
> solid built... I need to investigate the cause. Meanwhile, I could
> finish the compilation of the latest GEMPAK and it works nicely! :-)
>
> Christian
>
> 03 Oct 2005 12:36:10 -0600, Steve Chiswell <address@hidden>:
> > Christian,
> >
> > No other g77 flags were used here on our FC4 platform.
> > GEMPAK compiles and runs under both 32 and 64 bit. I post binary
> > distributions compiled on the 32 bit for users of either platform.
> >
> >
> > Steve Chiswell
> > Unidata User Support
> >
> >
> >
> > On Mon, 2005-10-03 at 11:19, Christian Pagé wrote:
> > > Steve,
> > >
> > > I was finally successful with the following modifications in the file
> > > Makeinc.linux:
> > > - I added -v -g to g77 invokation.
> > > and no further core dump...
> > >
> > > But, our system is 64-bit. Must I impose 32-bit for compilation?
> > >
> > > Christian
> > >
> > > 03 Oct 2005 10:08:07 -0600, Steve Chiswell <address@hidden>:
> > > > Christian,
> > > >
> > > > I have built the latest GEMPAK under FC4 with g77/gcc settings
> > > > as supplied with the distribution. If your g77 program core dumps,
> > > > then it sounds like a problem with the installation.
> > > >
> > > > Our FC4 32 bit environment is:
> > > > 2.6.12-1.1398_FC4
> > > >
> > > > g77 -v
> > > > --->>> gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-47.fc4)
> > > >
> > > > gcc -v
> > > > --->>> gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)
> > > >
> > > >
> > > > Gfortran use is not recommended at this time according to the
> > > > gfortran man page:
> > > >         For those whose Fortran codes conform to either the Fortran 77
> > > >         standard or the GNU Fortran 77 language, we recommend to use g77
> > > >         from GCC 3.4.  We recommend that distributors continue to
> > > >         provide packages of g77-3.4 until we announce that gfortran
> > > >         fully replaces g77.
> > > >
> > > > Steve Chiswell
> > > > Unidata User Support
> > > >
> > > > On Fri, 2005-09-30 at 19:58, Christian Pagé wrote:
> > > > > Hello everyone,
> > > > >
> > > > > I am not successful in compiling GEMPAK in Fedora Core 4.
> > > > > In FC4, there is gcc 4 and gfortran. gfortran breaks some GEMPAK code.
> > > > > If I try to use gcc 3.2 and g77, g77 exit with a segmentation fault
> > > > > (installed using yum).
> > > > >
> > > > > Anyone had success?
> > > > >
> > > > > Many thanks,
> > > > > --
> > > > > Christian Pagé
> > > > > UQAM
> > > >
> > >
> > >
> > > --
> > > Christian Pagé
> > > http://meteocentre.com/    http://meteoalerte.com/
> > > Etudiant au Doctorat en Sciences de l'environnement UQAM
> >
>
>
> --
> Christian Pagé
> http://meteocentre.com/    http://meteoalerte.com/
> Etudiant au Doctorat en Sciences de l'environnement UQAM
>


--
Christian Pagé
http://meteocentre.com/    http://meteoalerte.com/
Etudiant au Doctorat en Sciences de l'environnement UQAM

--- End Message ---