[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 19990422: NOAAPORT SDE modification

Tom, et al,

I talked to Chad yesterday and I inserted the fix into tg2 ( NCAR Np )
machine yesterday afternoon.  I also wrote Alden so they can insert the
fix.  I wish that NWS would of disseminated the changes so over 100
universities would of not lost model data.  I bet PRC systems had s/w
updates for this change.  I believe Dave Himes just did an update last
week for his PRC NOAAport system. A note about this needs to be written to
the NWS.

Robb... 

On Thu, 22 Apr 1999, Tom Yoksas wrote:

> 
> Robb, Glenn, Mike:
> 
> I received the following message from Dee Wade of SSEC this afternoon
> regarding a modification that needs to be made on NOAAPORT SDI
> ingester machines.  I just chatted with Glenn who noted that it is
> likely that Robb was in on the fix so we may not have anything to worry
> about, but I want to make sure.
> 
> So, Robb:  do we need to make a change on the NOAAPORT machine here
> at UCAR?  If so, who needs to do it?  If it is something that needs
> to be done locally, I can pitch in, but I will need a road map on
> the procedures, etc.
> 
> Tom
> 
> ------- Forwarded Message
> 
> Received: from ssec.wisc.edu (deew.ssec.wisc.edu [144.92.118.247]) by 
> ssec.wisc.edu (8.7.1/8.7.1) with ESMTP id QAA20525; Thu, 22 Apr 1999 16:53:47 
> -0500
> From: Dee Wade <address@hidden>
> Date: Thu, 22 Apr 1999 16:54:02 -0500
> Organization: SSEC
> Keywords: 199904222153.PAA28307 NOAAPORT SDI
> To: Tom Yoksas <address@hidden>
> CC: Dee Wade <address@hidden>
> Subject: NOAAPORT SDI mod
> 
> Hello Tom,
> I know that Chad contacted Unidata right away with his fix but I just
> wanted to make it "official" and send you the info below.
> 
> ---------------------------------------------------------------------------------
> Due to apparent NWS changes used to identify MRF/AVN GRIB messages as
> binary messages,  GRIB products of these types are not being processed 
> on your NOAAPORT machine. 
> 
> SSEC programmers have identified and corrected the problem and modified 
> the code so that future NWS changes of this type should not affect GRIB
> data processing.
> 
> TO update your NOAAPORT SDI you will need to get the following ASCII
> file and place it on your NOAAPORT machine.  We have set up an anonymous
> FTP on the machine gold
> 
> FTP to                  gold.ssec.wisc.edu
> goto                    /pub/nport
> get the file            exceptions
> 
> place this file on your SDI in:  /opt/nport
> 
> That should take care of the problem.
> 
> Dee Wade
> - -- 
> Dee Wade
> McIDAS User Services and Data Center
> Space Science and Engineering Center
> University of Wisconsin-Madison
> Email:     address@hidden
> Phone:     (608) 263-0527
> Fax:       (608) 263-6738
> 
> ------- End of Forwarded Message
> 

===============================================================================
Robb Kambic                                Unidata Program Center
Software Engineer III                      Univ. Corp for Atmospheric Research
address@hidden             WWW: http://www.unidata.ucar.edu/
===============================================================================