[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[IDD #SAX-259155]: GEM feed request



Hi John, 

This is the response I got from the CMC:


Jeff...

Attached below are the new links that do work. As per your request for
15 km Regional data and Global
data beyond 48 hrs, this request is being considered. Yves and Nicole
Bois have been copied.
We need to coordinate with our Data Acquisition group to see how much
more work is required to push more data.

..and for updated links, please visit:


http://weatheroffice.ec.gc.ca/grib/Low-resolution_GRIB_e.html

and

http://weatheroffice.ec.gc.ca/grib/CMC_GRIB_Technical_Grid_Specifications_e.html#low_res_reg

and

http://weatheroffice.ec.gc.ca/grib/Low-resolution_GRIB_e.html#convention

and

http://dd.weatheroffice.ec.gc.ca/grib/public/lores/CMC_reg_00

and

http://dd.weatheroffice.ec.gc.ca/grib/public/lores/CMC_reg_12



> Tom,
> It's taken me a while to get back to this, sorry to take so
> long.
> 
> The feed is working for the 60km regional data out to 48 hours.  We'd
> also like to get the 15 km data and the world data that goes beyond
> 48 hours.
> 
> =========================================================================
> John Nordlie   N0RNB            |     Regional Weather Information Center
> address@hidden            |              University of North Dakota
> 701-777-6112 / 701-777-3888 fax | PO Box 9007, Grand Forks, ND 58202-9007
> http://blizzard.rwic.und.edu/~nordlie/
> =========================================================================
> 
> On Mon, 12 Nov 2007, Unidata IDD Support wrote:
> 
> > Hi John,
> >
> > I apologize for the tardy reply, but the person best able to answer
> > you is out of the office today...
> >
> >> I'm trying to process the global GEM data feed on our LDM
> >> system.  I'm getting the regional data, but not the global.
> >>
> >> Our relevant ldmd.conf entry is:
> >>
> >> request GEM ".*" ldm.meteo.ec.gc.ca
> >
> > OK, you are requesting all of the GEM data...
> >
> >> The processing rules I'm using are:
> >>
> >> # Regional GEM feed
> >> CMC
> >> CMC_reg_.*_.*_.*_(.*)_([12][0-9][0-9][0-9])([0-1][0-9])([0-3][0-9])([0-2][0-9])_(P.*).grib
> >> FILE    /data1/model/GEM/\2\3\4\5_\6.\1
> >>
> >> # Global GEM feed
> >> CMC
> >> CMC_gbl_.*_.*_.*_(.*)_([12][0-9][0-9][0-9])([0-1][0-9])([0-3][0-9])([0-2][0-9])_(P.*).grib
> >> FILE    /data1/model/GEM/gbl/\2\3\4\5_\6.\1
> >
> > The best thing to do in a case like this is to use the LDM utility 
> > 'notifyme' to see
> > if your upstream feed site is getting data whose headers match the pattern 
> > you are using
> > for processing:
> >
> > <as 'ldm'>
> > notifyme -vxl- -f GEM -0 10000 -h ldm.meteo.ec.gc.ca
> >
> > If this 'notifyme' invocation shows no data with matching product ID, then 
> > there are
> > two possibilities:
> >
> > - your pattern might be incorrect
> >
> > - upstream feed site does not have the data that you want
> >
> > Please remember that the GEM data is sporadic; you will need to either 
> > leave 'notifyme'
> > running a long time, or run it during the period when you would expect to 
> > be receiving
> > the data.
> >
> > Cheers,
> >
> > Tom
> > ****************************************************************************
> > Unidata User Support                                    UCAR Unidata Program
> > (303) 497-8642                                                 P.O. Box 3000
> > address@hidden                                   Boulder, CO 80307
> > ----------------------------------------------------------------------------
> > Unidata HomePage                       http://www.unidata.ucar.edu
> > ****************************************************************************
> >
> >
> > Ticket Details
> > ===================
> > Ticket ID: SAX-259155
> > Department: Support IDD
> > Priority: Normal
> > Status: Closed
> >
> 
> 

Jeff Weber
Unidata User Support
http://www.unidata.ucar.edu

Ticket Details
===================
Ticket ID: SAX-259155
Department: Support IDD
Priority: Normal
Status: Open