[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[LDM #LRD-467349]: Request to allow HRRR feed



Hi Evan, 

Unless you use the reg ex in the ldmadmin watch command, you will see the whole 
feed.

I suspect your earlier, simple reg ex is sufficient.

Also, are you aware that this product is being served online from NOAA at:


http://rapidrefresh.noaa.gov/HRRRsubh/Welcome.cgi

I would go with:

REQUEST FSL2 "^GRIB2\.FSL\.HRRR.*REFC" hrrr.unidata.ucar.edu

..then the question is, how are you acting on it? (what is your pqact.conf 
entry? )

Hope this clears things up a bit..


Jeff



> Hello Tom,
> 
> Thanks again for the helpful response. I found the naming convention of
> the composite reflectivity product I'm looking for. An example file name is:
> 
> GRIB2.FSL.HRRR.1905141_Lambert.015Minute.REFC.EA.201406252000.*
> 
> I'm having another problem. I added the following line to my ldmd.conf
> file in an attempt to request ONLY the REFC products from the HRRR feed:
> 
> REQUEST FSL2 "^GRIB2\.FSL\.HRRR.*REFC" hrrr.unidata.ucar.edu
> 
> When I add this line, restart the LDM, then do an ldmadmin watch -f
> FSL2, I see other file types streaming in too:
> 
> Jun 26 04:55:11 pqutil INFO:   731352 20140626040218.260    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.REFC.EA.201406260200.*
> Jun 26 04:55:11 pqutil INFO:   351168 20140626040218.270    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.5WGH.CloudTop.201406260200.*
> Jun 26 04:55:11 pqutil INFO:  1225233 20140626040218.287    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.UGWD.EA.201406260200.*
> Jun 26 04:55:11 pqutil INFO:   810082 20140626040218.301    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.VGWD.EA.201406260200.*
> Jun 26 04:55:12 pqutil INFO:  1019662 20140626040218.316    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.Vis.Surface.201406260200.*
> Jun 26 04:55:12 pqutil INFO:   338184 20140626040218.326    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.REFD.1000m_FHAG.201406260200.*
> Jun 26 04:55:12 pqutil INFO:   868111 20140626040218.341    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.MAXUD_1Hour_Missing.40000Pa_to_100000Pa_Isobaric.201406260200.*
> Jun 26 04:55:12 pqutil INFO:   838654 20140626040218.354    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.CNWAT_1Hour_Missing.40000Pa_to_100000Pa_Isobaric.201406260200.*
> Jun 26 04:55:12 pqutil INFO:   508200 20140626040218.364    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.GVV_1Hour_Missing.50_to_80_Sigma.201406260200.*
> Jun 26 04:55:12 pqutil INFO:   594763 20140626040218.375    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.PMSL.MSL.201406260200.*
> Jun 26 04:55:13 pqutil INFO:   526271 20140626040218.384    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.POFP_1Hour_Missing.10m_FHAG.201406260200.*
> Jun 26 04:55:13 pqutil INFO:   108213 20140626040218.388    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.4/3/192/Table_2_UNDEF_2_1Hour_Missing.5000m_to_2000m_FHAG.201406260200.*
> Jun 26 04:55:13 pqutil INFO:    27410 20140626040218.389    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.4/3/192/Table_2_UNDEF_3_1Hour_Missing.6000m_to_1000m_FHAG.201406260200.*
> Jun 26 04:55:13 pqutil INFO:    55483 20140626040218.390    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.4/10/3/Table_2_UNDEF_192_1Hour_Missing.EA.201406260200.*
> Jun 26 04:55:13 pqutil INFO:     4930 20140626040218.391    FSL2 000
> GRIB2.FSL.HRRR.1905141_Lambert.005Hour.WDROP_1Hour_Missing.EA.201406260200.*
> 
> I've tried like 5 or 6 other regex entries in the ldmd.conf file too,
> checking them on a web-based regex checker. They all check good for only
> specifying the REFC products, but don't work with the ldmd.conf file. I
> even get uber-specific:
> 
> # REQUEST FSL2
> ^((GRIB2).(FSL).(HRRR).([0-9][0-9][0-9][0-9][0-9][0-9][0-9])(_Lambert).([0-9][0-9][0-9])(Minute|Hour).(REFC).(EA).([0-2][0-1][0-9][0-9][0-1][0-9][0-3][0-9][0-2][0-3][0-5][0-5]).*$)
> hrrr.unidata.ucar.edu
> 
> Everything I try gets me all the other files besides the REFC too. Upon
> examination, it looks like something is breaking down after "_Lambert.*".
> 
> Can you provide the correct regex entry to add to the ldmd.conf file to
> request only the REFC products?
> 
> Many thanks,
> Evan
> 
> On 6/25/2014 5:06 PM, Unidata IDD Support wrote:
> > Hi Evan,
> >
> > re:
> >> Yes, I now see the incoming data with the revised notifyme command.
> > Excellent!
> >
> > re:
> >> One other question...
> >>
> >> We're only really interested in the 15-min composite reflectivity
> >> product. Can you tell me what this product is called in the HRRR feed?
> > Unfortunately, I don't know what the LDM/IDD Product ID looks like for
> > either of the composite reflectivity products.  I will check with Jeff
> > Weber tomorrow to see if he knows.
> >
> > re:
> >> Thank you,
> > No worries.  Sorry for the hiccup earlier...
> >
> > Cheers,
> >
> > Tom
> > --
> > ****************************************************************************
> > Unidata User Support                                    UCAR Unidata Program
> > (303) 497-8642                                                 P.O. Box 3000
> > address@hidden                                   Boulder, CO 80307
> > ----------------------------------------------------------------------------
> > Unidata HomePage                       http://www.unidata.ucar.edu
> > ****************************************************************************
> >
> >
> > Ticket Details
> > ===================
> > Ticket ID: LRD-467349
> > Department: Support IDD
> > Priority: Normal
> > Status: Open
> >
> 
> 
H
Jeff Weber
Unidata User Support
http://www.unidata.ucar.edu

Ticket Details
===================
Ticket ID: LRD-467349
Department: Support IDD
Priority: Normal
Status: Open