[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 19991101: New LDM Installation

On Tue, 2 Nov 1999 address@hidden wrote:

> 
> 
> I started the ldm with the command you suggested below, and the only
> response was:
>      Nov 02 14:22:50 rpc.ldmd(16382): Starting Up (built: Aug 11 1999
> 15:19:15)
> 
> Still no logfile.  Interestingly enough, I noticed that with the ldmadmin
> watch, I still get the streaming data even though LDM is down.
> I edited ldmd.conf and commented out all the exec commands except exec
> pqact.  started LDM and got the same message as above.
> 
> What next?
> 
Alan,

Something is abnormal, it sounds like one of the ldm invocations is still
running. I would make sure everything is stopped before starting the ldm
again. It might be quicker if I could get a login on your machine to check
out the problem.

Robb...

> 
> 
> 
> 
> Robb Kambic <address@hidden> on 11/01/99 06:09:27 PM
>                                                               
>                                                               
>                                                               
>  To:      Alan Hall/NCDC                                      
>                                                               
>  cc:      support-ldm <address@hidden>, Anne    
>           Wilson <address@hidden>                      
>                                                               
>                                                               
>                                                               
>  Subject: Re: 19991101: New LDM Installation                  
>                                                               
> 
> 
> 
> 
> 
> 
> 
> 
> On Mon, 1 Nov 1999, Unidata Support wrote:
> 
> >
> > ------- Forwarded Message
> >
> > >From: address@hidden
> > >Subject: New LDM Installation
> > >Organization: NOAA/NCDC
> > >Keywords: 199911012102.OAA15776
> >
> >
> >
> > I have a new LDM installation and I am having trouble getting the data
> > where I want it.  When I issue ldmadmin watch, I can see lots and lots of
> > files streaming by and the date last modified of the ldm.pq is constantly
> > updating, so I know entried are being put into the ldm.pq.  BUT!!  I
> never
> > get the files created based on the pqact.conf file.  I have only one
> entry
> > in the file:
> >
> > WMO  ^(......) (....) ([0-3][0-9])([0-2][0-9])     FILE
> > /npraid/noaaport/data/\1\2\3\4.wmo
> >
> > If I understand this entry correctly, based on a WMO header of:
> > SAUS80 KWBC 041400
> > should be filed under:
> > /npraid/noaaport/data/SAUS80KWBC0414.wmo
> >
> Alan,
> 
> That's correct product construction SAUS80KWBC0414.wmo.
> 
> Something to check is that the ldm has write
> permission on dir /npraid/noaaport/data/   Also, if this was a binary
> installation and LDMHOME is not /usr/local/ldm, then a link needs to be
> made /usr/local/ldm.  Detail instructions at:
> 
> http://www.unidata.ucar.edu/packages/ldm/ldmPreInstallList.html#s8
> 
> 
> > There are tabs between fields and the ldmadmin pqcheck says the file is
> > syntactically correct.
> >
> >
> > I'm also having a syslog problem that might be related.  When I issue
> > ldmadmin newlog I get:
> >
> > hupsyslog: kill -HUP 202: Permission Denied
> 
> 
> This is because hupsyslog is not suid root. Instruction at:
> 
> http://www.unidata.ucar.edu/packages/ldm/ldmBinaryInstallList.html#s7
> 
> >
> > No logs are ever created anywhere that I can find.
> >
> 
> Start the ldm from the command line, ie
> 
> %  bin/rpc.ldmd -vl - -q data/ldm.pq etc/ldmd.conf
> 
> Look at the log messages on the screen.
> 
> Robb...
> 
> 
> 
> 
> > Any advice would be greatly appreciated,
> > Alan.
> >
> > PS: I am attaching the ldmd.conf and pqact.conf files.
> >
> > #####
> > # $Id: ldmd.conf,v 1.11 1999/08/05 16:18:09 rkambic Exp $
> > # Sample ldmd.conf for ldm5
> > ####
> > #
> > # This is the main configuration file for the LDM server. All lines that
> > start
> > # with a "#" sign are comments.
> > #
> > # To debug an LDM that hangs on start up, run the following from LDM
> home:
> > # % bin/rpc.ldmd -vl - -q data/ldm.pq etc/ldmd.conf
> > #
> > # If the LDM still hangs, comment out all lines in this file, try again.
> > #
> >
> ###########################################################################
> > ####
> > # Exec Entries
> >
> ###########################################################################
> > ####
> > #
> > # Programs that can share a queue with rpc.ldmd server, these programs
> > # are started by the "exec" command and are in the same process group.
> > #
> > exec "pqexpire"
> > exec "pqbinstats"
> > exec "pqact"
> > #exec     "pqsurf"
> > #
> >
> ###########################################################################
> > ####
> > # Request Entries
> >
> ###########################################################################
> > ####
> > #
> > # LDM5 servers request data from Data Sources
> > #
> > #    request   <feedset> <pattern> <hostname pattern>
> > #
> > #request WMO ".*" uni0.unidata.ucar.edu
> > #
> >
> ###########################################################################
> > ####
> > # Allow Entries
> >
> ###########################################################################
> > ####
> > #
> > # Giving permission for a Data Sink to perform a request to your LDM
> > #
> > # allow   <feedset> <hostname pattern>
> > #
> > # Giving permission to your own machine and Unidata
> > #allow    ANY
> >
> ((localhost|loopback)|(127\.0\.0\.1\.?$)|([a-z].*\.unidata\.ucar\.edu\.?$))
> > allow     ANY  ((localhost|loopback)|(127\.0\.0\.1\.?$))
> > #
> >
> ###########################################################################
> > ####
> > # Accept Entries
> >
> ###########################################################################
> > ####
> > # ACCEPT: Who can feed us, currently this action is ONLY needed for WSI
> > data
> > #
> > # accept <feedset> <pattern> <hostname pattern>
> > #
> > # accept anything from yourself
> > #
> > accept    ANY  ".*" ^((localhost|loopback)|(127\.0\.0\.1\.?$))
> > #
> > # accept from your upstream site
> > #
> > # WSI is using ldm4 protocol so the accept is still required
> > #accept   WSI
> > #    .*
> > #    ^[a-z].*\.uni\.wsicorp\.com$
> > #
> >
> ###########################################################################
> > ####
> > # End
> >
> ###########################################################################
> > ####
> >
> >
> > ####
> > # $Id: pqact.conf,v 1.10 1999/07/28 15:34:54 rkambic Exp $
> > #
> > # This is an example pqact.conf file,
> > # with some example entries commented out.
> > #
> > # The entries in this file control the local disposition
> > # of data. There is a whole chapter in the LDM Site Manager's
> > # Guide devoted to this file. We suggest you read and understand that
> > material.
> > # http://www.unidata.ucar.edu/packages/ldm/ldm5/LDM5-44.html#HEADING44-0
> > #
> > # The various display and analysis packages have various
> > # conventions on how they want data handled. When you
> > # install a package such as GEMPAK, you should find with that package
> > # collection of entries to add to this file.
> > #
> > # Example entries for GEMPAK can be found at
> > #
> http://www.unidata.ucar.edu/packages/gempak/GEMPAK5.4/configuration.html
> > # Example entries for LDM-McIDAS may be found at
> > #
> http://www.unidata.ucar.edu/packages/mcidas/mcidd/ldm-mcidas-pqact.conf
> > # and annotated entries for McIDAS-XCD are found at
> > #  http://www.unidata.ucar.edu/packages/mcidas/mcx/xcd_start.html
> > #
> > ##
> > # Format is
> > # feedtype tab pattern tab action [tab action_args]
> > # where tab is \t or \n\t.
> > #
> > # Actions are
> > #
> > #    NOOP
> > #         Do nothing
> > #
> > #    FILE [-overwrite|-flush|-close|-strip] filename
> > #         write(2) to unix file (flush calls fsync(2))
> > #
> > #    STDIOFILE [-overwrite|-flush|-close|-strip] filename
> > #         fwrite(3) (buffered io) to file (flush calls fflush(3))
> > #
> > #    DBFILE    dbfilename [dbkey]
> > #         Put to gdbmfile.
> > #
> > #    PIPE [-close|-strip] commandname [args]
> > #         Put data on stdin of a subprocess specified by
> > #              commandname [args].
> > #         Uses the execvp library call, so if commandname is not fully
> > #         qualified, the PATH environment variable will be used.
> > #
> > #    EXEC [-wait] commandname [args ...]
> > #         Run a program. No io channel between this process and it.
> > #         Like PIPE above, uses execvp.
> > #
> > # The '-strip' option to FILE, STDIOFILE, & PIPE removes control
> characters
> > # (other than the '\n') from the data before output. This is useful for
> > # cleaning up WMO format text bulletins (like the ldm3  STRIP psuedo
> > action).
> > #
> > # To check the syntax of the pqact.conf file, execute pqact with the
> > product
> > # queue specified as /dev/null:
> > #
> > #    pqact -vxl- -q /dev/null pqact.conf
> > #
> > #              or
> > #    ldmadmim pqactcheck
> > #
> > # To send an HUP signal to pqact
> > #
> > #    ldmadmin pqactHUP
> > #    ldmadmin tail     (used to check if HUP took, looking for ReRead
> msg)
> > ###
> > ####
> > # Bin all the (Non-GRIB) WMO format data, using elements from the
> > # identifier as path components. The minutes portion of the timestamp,
> > # and the retransmit code is ignored. The day of the month portion
> > # of the timestamp is not used as a path component, so it would be
> > # a good idea to run 'scour' on a less than 24 hour basis.
> > #
> > #  "ASUS42 KRDU 012259" gets filed as
> > #  data/US/KRDU/22/AS42.wmo
> > #
> > WMO  ^(..)(..)(..) (....) ([0-3][0-9])([0-2][0-9])      FILE
> > /npraid/noaaport/data/\2\4\6\4_\5\6.wmo
> > ##
> >
> >
> >
> >
> >         National Climatic Data Center
> >
> >
> > ------- End of Forwarded Message
> >
> 
> ===========================================================================
> ====
> Robb Kambic                      Unidata Program Center
> Software Engineer III                 Univ. Corp for Atmospheric Research
> address@hidden         WWW: http://www.unidata.ucar.edu/
> ===========================================================================
> ====
> 
> 
> 
> 

===============================================================================
Robb Kambic                                Unidata Program Center
Software Engineer III                      Univ. Corp for Atmospheric Research
address@hidden             WWW: http://www.unidata.ucar.edu/
===============================================================================