[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[LDM #MUX-347649]: Getting a REGEXP to work with NGRID is driving me nuts!

Gilbert,

> OK. I have tried Google, making sure tabs weren't spaces...
> 
> I've spent 3 hours on this, and I'm totally stuck.
> 
> I want the 20 km RUC 1 hour forecast from the NGRID feed.
> To do this, I make an appropriate notifyme to see if it works
> from idd.unidata.ucar.edu, then I request it from my NOAAPort
> receiver/server:
> 
> /home/ldm% notifyme -v -l - -o 3000 -h weather2.admin.niu.edu -p
> "^[LM].DB.. KWBG"
> Nov 11 04:05:35 notifyme[27767] NOTE: Starting Up: weather2.admin.niu.edu:
> 20111111031535.526 TS_ENDT {{ANY,  "^[LM].DB.. KWBG"}}
> Nov 11 04:05:35 notifyme[27767] NOTE: LDM-5 desired product-class:
> 20111111031535.526 TS_ENDT {{ANY,  "^[LM].DB.. KWBG"}}
> Nov 11 04:05:35 notifyme[27767] INFO: Resolving weather2.admin.niu.edu to
> 131.156.8.58 took 0.000265 seconds
> Nov 11 04:05:35 notifyme[27767] NOTE: NOTIFYME(weather2.admin.niu.edu): OK
> Nov 11 04:05:36 notifyme[27767] INFO:    33629 20111111034203.724   NGRID
> 47028839  LHDB62 KWBG 110300
> !grib2/ncep/RUC2/#130/201111110300F001/HGHT/625 hPa PRES
> Nov 11 04:05:36 notifyme[27767] INFO:    33775 20111111034203.901   NGRID
> 47028840  LHDB75 KWBG 110300
> !grib2/ncep/RUC2/#130/201111110300F001/HGHT/750 hPa PRES
> 
> And verify that it works. So, again, I have put that into an ldmd.conf
> entry, and as you can see, it is coming in.
> 
> Oh, but now I want to save the incoming data. Easy? Sure:
> 
> # File raw GRIB messages corresponding to RUC model on the Q (211) grid.
> HRS     ^[YZ].Q... KWB. ([0-3][0-9])([0-2][0-9]).*/mRUC
> FILE    hrs/ruc/\2(\1:mm)\1(\1:yy).gbr
> NGRID   ^[LM].DB.. KWBG ([0-3][0-9])([0-2][0-9])
> #       FILE    hrs/ruc/\2(\1:mm)\1(\1:yy).grd
> FILE    hrs/ruc/(\1:yyyy)(\1:mm)(\1:dd).grd
> 
> The HRS entry on top is saving the data normally. But neither of the
> bottom ones are. Naturally, there are no errors in ldmd.log, pqact.conf
> checks out fine, and there are NO files that end in .grd in hrs/ruc/
> where they are supposed to go. Not even a trace of one.
> 
> So...you can see what I want to do; I want to match the filename as seen
> in the HRS entry above the NGRID entry. How do I get there from here?

The first thing I would do would be to verify that you can correctly process 
the desired data-products that are already in the product-queue. Extract the 
pqact(1) configuration-file entry into its own configuration-file and then 
execute pqact(1) manually -- specifying the configuration-file you just created 
-- and ensuring that the "time offset" option will cause any desired 
data-products in the product-queue to be process (verify that they do exist in 
the product-queue with an appropriate pqcat(1)). Make sure you execute the 
pqact(1) process in the right directory.

> Confused in DeKalb,
> 
> Gilbert
> 
> *******************************************************************************
> Gilbert Sebenste                                                     ********
> (My opinions only!)                                                  ******
> Staff Meteorologist, Northern Illinois University                      ****
> E-mail: address@hidden                                  ***
> web: http://weather.admin.niu.edu                                      **
> Twitter: http://www.twitter.com/NIU_Weather                            **
> Facebook: http://www.facebook.com/niu.weather                           *
> *******************************************************************************

Regards,
Steve Emmerson

Ticket Details
===================
Ticket ID: MUX-347649
Department: Support LDM
Priority: Normal
Status: Closed