[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20040726: Problem with installing NetCDF-PERL



Don,

It could be that the POLLUTE variable needs to be defined in order to 
correctly build the netCDF-Perl package.

Please try the following:

    1.  Go to the top-level source-directory.

    2.  Execute the command "make distclean".

    3.  Perform step 2 described near the end of the file INSTALL.  You
        should use the same settings as before.

    4.  Ensure that the environment variable POLLUTE is defined with
        the value 1, e.g.,

            export POLLUTE=1

        or

            setenv POLLUTE 1

        depending on your user-shell.

    5.  Perform steps 3 through 9 described near the end of the file
        INSTALL.

Please let me know if this helps.

Regards,
Steve Emmerson

NOTE: All email exchanges with Unidata User Support are recorded in the
Unidata inquiry tracking system and then made publically available
through the web.  If you do not want to have your interactions made
available in this way, you must let us know in each email you send to us.

------- Original Message

>To: address@hidden
>From: Don Hooper <address@hidden>
>Subject: Problem with installing NetCDF-PERL
>Organization: CU
>Keywords: 200407262305.i6QN5aaW007894 netCDF-perl

To whoever receives this missive,

Here are the requested items:

A. SunOS sr1 5.8 Generic_117350-02 sun4u sparc SUNW,Ultra-4
B. 1.2.3
C. /usr/local/bin/cc
        (cc: Sun WorkShop 6 update 2 C 5.3 2001/05/15)
D.:
creating cache ./config.cache
checking for catman... catman
checking for manual-page index command... catman -w -M $(MANDIR)
checking for perl utility... /home/www/data/hoop/bin/perl
checking for perl manual page directory... /home/www/data/hoop/man
checking for value of perl POLLUTE variable... 0
checking for neqn... neqn
checking for tbl... tbl
checking for cc... cc
checking type of operating system... sunos5
checking for tar flags... -chof
checking for netCDF header-file... -I/usr/local/include
checking for netCDF library... -L/usr/local/lib
checking for package version... 1.2
updating cache ./config.cache
creating ./config.status
creating Makefile
creating perl/Makefile.PL
creating port/master.mk
creating port/Makefile
expanding `include's in file `Makefile'
expanding `include's in file `perl/Makefile.PL'
expanding `include's in file `port/master.mk'
expanding `include's in file `port/Makefile'

E.:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

configure:593: checking for catman
configure:635: checking for manual-page index command
configure:686: checking for perl utility
configure:694: checking for perl manual page directory
configure:712: checking for value of perl POLLUTE variable
configure:759: checking for neqn
configure:791: checking for tbl
configure:1047: checking for cc
configure:1186: checking type of operating system
configure:1263: checking for tar flags
configure:1279: checking for netCDF header-file
configure:1306: checking for netCDF library
configure:1335: checking for package version

F.:
cd perl && /home/www/data/hoop/bin/perl Makefile.PL POLLUTE=0
Checking if your kit is complete...
Looks good
Writing Makefile for NetCDF

G.:
make[1]: Entering directory `/data/hoop/PERL/netcdf-perl-1.2.3/src'
make[2]: Entering directory `/data/hoop/PERL/netcdf-perl-1.2.3/src'

making `dynamic' in directory /data/hoop/PERL/netcdf-perl-1.2.3/src/perl

make[3]: Entering directory `/data/hoop/PERL/netcdf-perl-1.2.3/src/perl'
/home/www/data/hoop/bin/perl /home/www/data/hoop/lib/perl5/5.8.5/ExtUtils/xsubp
p  -typemap /home/www/data/hoop/lib/perl5/5.8.5/ExtUtils/typemap  NetCDF.xs > N
etCDF.xsc && mv NetCDF.xsc NetCDF.c
Please specify prototyping behavior for NetCDF.xs (see perlxs manual)
/opt/SUNWspro/bin/cc -c  -I/usr/local/include -I/usr/local/include -D_LARGEFILE
_SOURCE -D_FILE_OFFSET_BITS=64 -O   -DVERSION=\"1.2.3\" -DXS_VERSION=\"1.2.3\" 
- -KPIC "-I/home/www/data/hoop/lib/perl5/5.8.5/sun4-solaris/CORE"   NetCDF.c
Running Mkbootstrap for NetCDF ()
chmod 644 NetCDF.bs
rm -f blib/arch/auto/NetCDF/NetCDF.so
LD_RUN_PATH="" /opt/SUNWspro/bin/cc  -G -L/usr/lib -L/usr/ccs/lib -L/opt/SUNWsp
ro/WS6U2/lib -L/usr/local/lib NetCDF.o  -o blib/arch/auto/NetCDF/NetCDF.so     
 
chmod 755 blib/arch/auto/NetCDF/NetCDF.so
cp NetCDF.bs blib/arch/auto/NetCDF/NetCDF.bs
chmod 644 blib/arch/auto/NetCDF/NetCDF.bs
make[3]: Leaving directory `/data/hoop/PERL/netcdf-perl-1.2.3/src/perl'

returning to directory /data/hoop/PERL/netcdf-perl-1.2.3/src
 
make[2]: Leaving directory `/data/hoop/PERL/netcdf-perl-1.2.3/src'
make[1]: Leaving directory `/data/hoop/PERL/netcdf-perl-1.2.3/src'
test ! -f perl/so_locations || chmod a+w perl/so_locations

H.:
make[1]: Entering directory `/data/hoop/PERL/netcdf-perl-1.2.3/src'

making `test' in directory /data/hoop/PERL/netcdf-perl-1.2.3/src/perl

make[2]: Entering directory `/data/hoop/PERL/netcdf-perl-1.2.3/src/perl'
cp NetCDF.pm blib/lib/NetCDF.pm
AutoSplitting blib/lib/NetCDF.pm (blib/lib/auto/NetCDF)
PERL_DL_NONLAZY=1 /home/www/data/hoop/bin/perl "-Iblib/lib" "-Iblib/arch" test.
pl
Can't load 'blib/arch/auto/NetCDF/NetCDF.so' for module NetCDF: ld.so.1: /home/
www/data/hoop/bin/perl: fatal: relocation error: file blib/arch/auto/NetCDF/Net
CDF.so: symbol ncopts: referenced symbol not found at /home/www/data/hoop/lib/p
erl5/5.8.5/sun4-solaris/DynaLoader.pm line 230.
 at test.pl line 5
Compilation failed in require at test.pl line 5.
BEGIN failed--compilation aborted at test.pl line 5.
make[2]: *** [test_dynamic] Error 255
make[2]: Leaving directory `/data/hoop/PERL/netcdf-perl-1.2.3/src/perl'
make[1]: *** [perl/test] Error 1
make[1]: Leaving directory `/data/hoop/PERL/netcdf-perl-1.2.3/src'
make: *** [test] Error 2

In addition, I had the following environment variable settings:
CPP_NETCDF=-I/usr/local/include
LD_NETCDF=-L/usr/local/lib
PERL=/home/www/data/hoop/bin/perl
PERL_MANDIR=/home/www/data/hoop/man

I just downloaded this perl last week (5.8.5).  The NetCDF in /usr/local/lib
is 3.4.  I didn't have any trouble doing UDUNITS-PERL.

Thanks,
- -Hoop

------- End of Original Message