[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Portmapper Problems

On Fri, May 19, 2000 at 08:35:56PM -0500, Ken Waters wrote:
> Hi, Robb!
> 
> Someone here at the office figured out the problem.  The person who set 
> up the machine for higher security moved the portmapper to run at run-
> time level 4.  Apparently, LDM needs to have it at level 3.  That was a 
> tough one to catch!  We're looking somebody figured that out.  The box 
> is now back to doing a great job running LDM and sending files to our 
> webserver.

Redhat boxes come, default, running at runlevel 3.  Runlevel
4 is unused.  The box itself, the computer, is running at
runlevel 3 - so it's not just LDM that needs the portmapper
at runlevel 3, it's probably that the portmapper was never
started because the box doesn't run at runlevel 4.

Dana

> 
> BTW...you'll recall my message traffic of a couple of months ago where 
> the Perl script was kicking off lots of child processes from system 
> calls...I fixed it by having just the one script run all the time in 
> the background.  Now it just sleeps for 5 seconds, then gets the list 
> of files in the directory and increments through them.  I'm not even 
> kicking off the script any more in pqact.conf.  Rather, I found it much 
> more efficient to just do a FILE on the incoming products.  I got a lot 
> of the ideas of how to get that to work from you, so THANKS!
> 
> Ken
> 
> 
> ----- Original Message -----
> From: Robb Kambic <address@hidden>
> Date: Friday, May 19, 2000 5:23 pm
> Subject: Re: Portmapper Problems
> 
> > On Fri, 19 May 2000, Ken Waters wrote:
> > 
> > > We are trying to set up a new primary LDM machine, running on Redhat
> > > Linux 6.0.  This machine was successfully running LDM just fine 
> > a few
> > > weeks ago.  Since then, several changes were made to it relating to
> > > firewall installation.
> > > 
> > > Now, the LDM does not seem to start correctly.  It "hangs" on the
> > > 'ldmadmin start' command.  I double-checked all the root-level
> > > pre-installation steps (/etc/services, /etc/rpc, 
> > /etc/syslog.conf, etc.)
> > > and they are all okay.  Now, going on to your troubleshooting 
> > section,> when I issue the "rpcinfo -p <hostname>" command, I get 
> > an error that
> > > rpc is unable to access the portmapper.  I issue the "rpcinfo -d 
> > 300029> 4" command but that does not seem to fix the problem.
> > 
> > Ken,
> > 
> > I believe your problem stems from your Firewall configurations. First,
> > port 388 needs to be open for TCP/UDP packets for sites trying to 
> > accessthe LDM server machine. That's the basic communication needs 
> > for the LDM,
> > plus the LDM needs to access the portmapper so it can determine 
> > which port
> > it's using.  Your invocation "rpcinfo -p" failure indicates that 
> > at one
> > Firewall configuration is not correct. 
> > 
> > I would review the Firewall documentation to see if there are
> > other configuration/flags the need to be set to permit proper
> > communication between the LDM processes and the outside world.  
> > Since, I
> > have never installed a Firewall I don't know the details and each 
> > Firewallpackage is different.
> > 
> > Robb...
> > 
> > > 
> > > I'm sorry I can't include snippets of the log files right now 
> > because we
> > > did an emergency switch of the machines back so that we can continue
> > > serving data.  I hope to be able to provide more information a 
> > little> bit later once I regain access to the box.
> > > 
> > > Thanks!!
> > > 
> > > Ken Waters
> > > Southern Region HQ, NWS
> > > 
> > > 
> > > 
> > > 
> > 
> > 
> ========================================================================
> =======
> > Robb Kambic                            Unidata Program Center
> > Software Engineer III                          Univ. Corp for Atmospheric 
> Research
> > address@hidden                 WWW: 
> http://www.unidata.ucar.edu/
> > 
> ========================================================================
> =======
> > 
> > 
> 

-- 

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
        "It's hard to sing with someone...   +   Dana Quinn
           who won't sing with you"          +   address@hidden
                -The Jayhawks                +   linux type guy
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++