Mohamed,
Regarding the error "/usr/include/netcdf.mod is not a valid module
information file", this is an important file for the Fortran 90
interface. You need to debug this. Please find the correct
location of netcdf.mod on your system, and change the path in the -I
command argument to match.
This file might be in the same directory as the library file
libnetcdf.a, or a different directory. The standard install
location for this file is, I think, in a separate "include"
directory. Good luck.
--Dave
Mohamed Mohamed wrote:
Dave
Thanks for your help. I made simple Fortran programs and it is going
well.
I made you simple test program but I had this statement
"Fatal Error: netcdftest.f90, line 2: /usr/include/netcdf.mod is not a
valid module information file
detected at NETCDF@<end-of-statement>"
Thanks
Mohamed Ali
malibec2005@xxxxxxxxx
Mob 00447912033240
SChEME Department
Faculty of Engineering
University of Nottingham
Nottingham (NG7 2RD) UK
Fax: 0044(0)115 951 4115
-----Original Message-----
From: netcdfgroup-bounces@xxxxxxxxxxxxxxxx
[mailto:netcdfgroup-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Dave Allured
Sent: Monday, November 10, 2008 8:52 PM
To: netcdfgroup@xxxxxxxxxxxxxxxx
Subject: Re: [netcdfgroup] netcdf
Mohamed,
The statement "use netcdf" goes into your fortran 90 program below the
program or subroutine or function statement, and above "implicit none".
You should study and understand Fortran 90 modules before working on
this program.
See if you can get this simple test program to compile and run:
program netcdf_version
use netcdf
print *, trim(nf90_inq_libvers())
end
The compile command should look something like this:
f90 netcdf_version.f90 -I/usr/include -L/usr/lib64 -lnetcdf
where the include directory contains the file netcdf.mod.
Is there any chance that you have old Fortran 77 code that somehow got
renamed to ".f90" without complete conversion to Fortran 90?
--Dave
Mohamed Mohamed wrote:
Dave,
Thanks, I think it is may be the solution. However I am still a
beginner in the Linux. So please could you tell me what to do.
You said " I suspect that you need to add this to the top of each
program unit that has Netcdf calls:
use netcdf " My question is how ?
Find below a long part of the error. Please have a look.
f_ts.o vdif_uv.o vertvl_edge.o water_depth.o wreal.o ghostuv.o dens3.o
init_sed.o advave_edge_gcy.o advection_edge_gcy.o adv_uv_edge_gcy.o
bcond_gcy.o shape_coef_gcy.o depth_check.o vdif_ts_gom.o adjust_ts.o
shutdown_check.o extelpf_edge.o fct_q2.o fct_q2l.o viscofh.o
print_vals.o rho_mean.o viz.o -L/usr/lib64 -lnetcdf
mod_ncdio.o: In function `__mod_ncdio__handle_ncerr':
mod_ncdio.f90:(.text+0x125): undefined reference to
`__netcdf__nf90_strerror'
mod_ncdio.o: In function `__mod_ncdio__putvar':
mod_ncdio.f90:(.text+0x11e4): undefined reference to
`__netcdf__nf90_put_var_2d_fourbytereal'
<snip many messages>
Thanks
Mohamed Ali
malibec2005@xxxxxxxxx
Mob 00447912033240
SChEME Department
Faculty of Engineering
University of Nottingham
Nottingham (NG7 2RD) UK
Fax: 0044(0)115 951 4115
-----Original Message-----
From: netcdfgroup-bounces@xxxxxxxxxxxxxxxx
[mailto:netcdfgroup-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Dave
Allured
Sent: Thursday, November 06, 2008 5:50 PM
To: netcdfgroup@xxxxxxxxxxxxxxxx
Subject: Re: [netcdfgroup] netcdf
Mohamed,
These are missing library symbol errors. I suspect that you need to
add this to the top of each program unit that has Netcdf calls:
use netcdf
This is because the Netcdf Fortran 90 interface uses modules. You
can't properly link to the Netcdf F90 library without this
declaration.
For diagnosis, your program is trying to link to this:
__netcdf__nf90_open
But with a correct "use" statement it should be seeking a symbol named
something like this (the name change may vary by compiler and
platform):
___netcdf_MOD_nf90_open
I might be wrong about all of this if you are on a platform or
compiler that uses Fortran 90 linking conventions much different than
what I am familiar with. If "use" doesn't fix it, then please provide
identification and version info for your platform, compiler, and
netcdf version.
Dave Allured
CU/CIRES Climate Diagnostics Center (CDC)
http://cires.colorado.edu/science/centers/cdc/
NOAA/ESRL/PSD, Climate Analysis Branch (CAB) http://www.cdc.noaa.gov/
Mohamed Mohamed wrote:
I worked with FVCOM software. When I started to get netcdf output
type
I received the following error:
mod_lag.f90:(.text+0x89f6): undefined reference to
`__netcdf__nf90_put_att_text'
mod_lag.f90:(.text+0x8a1e): undefined reference to
`__netcdf__nf90_put_att_text'
<snip many messages>
_______________________________________________
netcdfgroup mailing list
netcdfgroup@xxxxxxxxxxxxxxxx
For list information or to unsubscribe, visit:
http://www.unidata.ucar.edu/mailing_lists/
This message has been checked for viruses but the contents of an attachment
may still contain software viruses, which could damage your computer system:
you are advised to perform your own checks. Email communications with the
University of Nottingham may be monitored as permitted by UK legislation.
_______________________________________________
netcdfgroup mailing list
netcdfgroup@xxxxxxxxxxxxxxxx
For list information or to unsubscribe, visit: http://www.unidata.ucar.edu/mailing_lists/
