Hi Jose,
> Just curious, why can't it be done in the manner that I thought it
> could be done?
>
> Why do I have to go install a whole other software to do what should
> be pretty simple?
>
> I need to do work, not install software...
>
> I might as well just do it my own made up wonky way that works...
>
> seem like every bag of worms just contains another bag of worms...
>
> frustrating!
I sympathize, but the approach you were suggesting is not supported by
the C ncdump, though there is a netCDF-Java ncdump that comes closer to
what you want:
http://www.unidata.ucar.edu/software/netcdf-java/reference/manPages.html
Changes to the C ncdump to support a query language on the command line
are non-trivial.
For those familiar with Python, I think the solution Rich Signell
provided is very elegant and worth studying, because it's far more
powerful than what can be accomplished with relatively primitive
command-line tools.
--Russ
> ----- Original Message -----
> From: "Signell, Richard" <rsignell@xxxxxxxx>
> Date: Monday, November 19, 2012 3:36 pm
> Subject: Re: [netcdfgroup] Extracting time series from netCDF file
> To: Jose Borrero <jborrero@xxxxxxx>
> Cc: netcdfgroup@xxxxxxxxxxxxxxxx
>
> > Jose,
> > If you were used to using Matlab but no longer have it, you might try
> > Python, which you can use in a similar fashion. This example shows how
> > to extract and plot a time series of wave heights from a remote
> > OPeNDAP dataset, but would work the same with a local NetCDF file:
> > http://nbviewer.ipython.org/4113653/
> >
> > This code uses the NetCDF4-Python module, which reads NetCDF and
> > OPeNDAP datasets using the same syntax. It can be a pain to install,
> > but I didn't have to build it because I have the Enthought Python
> > Distribution, which includes NetCDF4-Python with OPeNDAP support. (I
> > think the full version of the EPD is free for folks with .edu
> > addressses, and of course there are many other options for free
> > scientific distributions as well).
> >
> > Good luck,
> > -Rich
> >
> >
> > On Mon, Nov 19, 2012 at 12:59 PM, Jose Borrero <jborrero@xxxxxxx>
> > wrote:>
> > >
> > > Hi All,
> > >
> > > I have a program that produces netCDF files of water levels over
> > a geographic region fro different times.
> > >
> > > the header looks like this:
> > >
> > > ===============================================
> > > lon = 720 ;
> > > lat = 330 ;
> > > grid_lon = 720 ;
> > > grid_lat = 330 ;
> > > rows = 3 ;
> > > clms = 3 ;
> > > time = UNLIMITED ; // (226 currently)
> > > variables:
> > > double lon(lon) ;
> > > lon:long_name = "longitude" ;
> > > lon:units = "degrees_east" ;
> > > lon:point_spacing = "even" ;
> > > double lat(lat) ;
> > > lat:long_name = "latitude" ;
> > > lat:units = "degrees_north" ;
> > > lat:point_spacing = "uneven" ;
> > > double grid_lon(grid_lon) ;
> > > grid_lon:long_name = "longitude" ;
> > > grid_lon:units = "degrees_east" ;
> > > grid_lon:point_spacing = "even" ;
> > > double grid_lat(grid_lat) ;
> > > grid_lat:long_name = "latitude" ;
> > > grid_lat:units = "degrees_north" ;
> > > grid_lat:point_spacing = "uneven" ;
> > > double O2Geo(clms, rows) ;
> > > O2Geo:long_name = "rotation matrix" ;
> > > float max_amp(grid_lat, grid_lon) ;
> > > max_amp:long_name = "Maximum Wave Amplitude" ;
> > > max_amp:units = "centimeters" ;
> > > max_amp:_FillValue = -1.e+34f ;
> > > max_amp:missing_value = -1.e+34f ;
> > > double time(time) ;
> > > time:long_name = "time" ;
> > > time:units = "seconds" ;
> > > time:calendar = "gregorian" ;
> > > float ha(time, lat, lon) ;
> > > ha:long_name = "Wave Amplitude" ;
> > > ha:units = "centimeters" ;
> > > ha:missing_value = -1.e+34f ;
> > > ha:_FillValue = -1.e+34f ;
> > > ===============================================
> > >
> > > i would like to extract a time series of data at a specific
> > location.>
> > > I have been looking at the ncdump command and thinking there
> > would be a way do it at the command line, i.e. something like:
> > >
> > > ncdump -v ha(lat,lon, time[1=>t]) datafile.nc > timeseries.cdl
> > >
> > > (I realize the syntax is totally wrong, i am just trying to
> > express how I would specify a lat/lon and ask for the data over the
> > entire time)
> > >
> > > then using ncgen to make a new binary netCDF that can be read by
> > GMT's nc2xy and output a simple 2 column time series.
> > >
> > > but I don't think I can specify things that way with ncdump.
> > >
> > > I then looked in to using the ncBrowse software. I have managed
> > to use that to specify a time series of data at a point, and even
> > write that data out to a CDL file. However, the file generated by
> > ncBrowse (pasted below in an edited form) cannot be read by nc2xy
> > and has characters that are not compatible with ncgen
> > >
> > > nc2xy tells me: nc2xy: NetCDF: Unknown file format [ha.cdl]
> > >
> > > and ncgen tells me:
> > >
> > > ncgen: ha.cdl line 7: syntax error, unexpected '=', expecting ','
> > or ')'
> > >
> > > ===================================================
> > > netcdf ha.cdl {
> > > dimensions:
> > > time = UNLIMITED ; // (226 currently)
> > > lat = 1 ;
> > > lon = 1 ;
> > > variables:
> > > double time(time=226);
> > > time:long_name = "time";
> > > time:units = "seconds";
> > > time:calendar = "gregorian";
> > > double lat(lat=330);
> > > lat:long_name = "latitude";
> > > lat:units = "degrees_north";
> > > lat:point_spacing = "uneven";
> > > double lon(lon=720);
> > > lon:long_name = "longitude";
> > > lon:units = "degrees_east";
> > > lon:point_spacing = "even";
> > > float ha(time=226, lat=330, lon=720);
> > > ha:long_name = "Wave Amplitude";
> > > ha:units = "centimeters";
> > > ha:missing_value = -1.0E34f; // float
> > > ha:_FillValue = -1.0E34f; // float
> > > data:
> > >
> > > time = 0.0, <ALL THE TIMES>, 14400.0 ;
> > >
> > > lat = 24.00833 ;
> > >
> > > lon = 60.00833 ;
> > >
> > > ha = 1.0723767, <ALL THE ha VALUES>1.6242466 ;
> > >
> > > }
> > > ===================================================
> > >
> > > so then, I go in to the ha.cdl file and edit the header in a text
> > editor to remove the =226, =330 and =720 bits and change the line:
> > >
> > > float ha(time=226, lat=330, lon=720);
> > >
> > > to
> > >
> > > float ha(time);
> > >
> > > I then run run:
> > >
> > > ncgen -b -o ha.nc ha.cdl
> > >
> > > and make a file ha.nc which then can be accessed by nc2xy through
> > the command:
> > >
> > > nc2xy ha.nc -Ftime/ha > ha.txt
> > >
> > > to create the file ha.txt which looks like:
> > >
> > > ===========================
> > > 0.000 17.423
> > > 64.000 61.289
> > > 128.000 36.575
> > > <...SNIP...>
> > > 14336.000 -2.210
> > > 14400.000 -2.147
> > > ===========================
> > >
> > > and is exactly what i want! Two columns, time and ha at that
> > particular lat/lon So I know it is possible...
> > >
> > > So, if you are still with me, how can i do this more simply,
> > through the command line preferably, or even a small script that goes:
> > >
> > > ncdump (args)
> > > ncgen (args)
> > > nc2xy (args)
> > >
> > > would be fine, but I just need to know the right arguments to
> > make it all talk to each other.
> > >
> > > if you can help me, MANY, MANY, THANKS!!!!
> > >
> > > -jose
> > >
> > > (p.s. i used to do this with MATLAB, but I recently had my
> > computer with MATLAB die, and i can't get it up and running again,
> > so i am trying to do this an alternative way...)
> > >
> > >
> > > _______________________________________________
> > > netcdfgroup mailing list
> > > netcdfgroup@xxxxxxxxxxxxxxxx
> > > For list information or to unsubscribe, visit:
> > http://www.unidata.ucar.edu/mailing_lists/
> >
> >
> > --
> > Dr. Richard P. Signell (508) 457-2229
> > USGS, 384 Woods Hole Rd.
> > Woods Hole, MA 02543-1598
> >
>
> _______________________________________________
> netcdfgroup mailing list
> netcdfgroup@xxxxxxxxxxxxxxxx
> For list information or to unsubscribe, visit: http://www.unidata.ucar.edu/m
> ailing_lists/
