Thanks, Ward
Just one more note
There are actually 2 HDF(4) libraries on the hdf-4.2.9 distribution
1) the "HDF" library
2) the "MFHDF" library, where MF stands for Multi File
You have a way to specify the MFHDF location with HAVE_MFHDF_H, but I
believe a way to specify the "HDF" header location is also needed, otherwise
I get compiling errors
3>I:\hdf4_explorer\mfhdf\libsrc\netcdf.h(25): fatal error C1083: Cannot open
include file: 'hdfi.h': No such file or directory
#include "hdfi.h"
------------
pvicente@xxxxxxx
Department of Earth System Science
3200 Croul Hall
University of California, Irvine
Irvine, CA 92697-3100
----- Original Message -----
From: "Ward Fisher" <wfisher@xxxxxxxxxxxxxxxx>
To: "Pedro Vicente" <pvicente@xxxxxxx>
Cc: "HDF Users Discussion List" <hdf-forum@xxxxxxxxxxxxxxxxxx>;
<netcdfgroup@xxxxxxxxxxxxxxxx>
Sent: Tuesday, October 08, 2013 11:26 AM
Subject: Re: [netcdfgroup] netCDF-C 4.3.1-rc3 now available --- HDF4 Cmake
support ?
On 10/8/13 12:18 PM, Pedro Vicente wrote:
Hi Ward
'
Hi Pedro,
Thanks for the bug report; I will correct it for the next release!
-Ward
-DHAVE_MFHDF_H=<path>,
yes, that was exactly what I was looking for.
I am not very familiar yet with CMake scripts, all these symbols are
listed in CMakeLists.txt, the location of the HDF4 multi file library, as
well
the HDF4 library names
CHECK_INCLUDE_FILE("mfhdf.h" HAVE_MFHDF_H)
FIND_LIBRARY(HDF4_DF_LIB NAMES df libdf)
FIND_LIBRARY(HDF4_MFHDF_LIB NAMES mfhdf libmfhdf)
I tried with these options, that for my case are
-D"HAVE_MFHDF_H=I:\hdf4_explorer\mfhdf\libsrc"
-D"HDF4_DF_LIB=I:\hdf4_explorer\windows\lib\debug\singlethreaded\hd421d.lib"
-D"HDF4_MFHDF_LIB=I:\hdf4_explorer\windows\lib\debug\singlethreaded\hm421d.lib"
The Cmake generation of projects ran without errors
-- CMake Summary:
-- Build Type: DEBUG
-- Building Shared Libraries: OFF
-- Building netCDF-4: ON
-- Building DAP Support: ON
-- Building Utilities: ON
-- Using pnetcdf: OFF
-- Using Parallel IO: OFF
-- Linking against:
I:\hdf5-1.8.11\build\bin\Debug\hdf5_D.lib;I:\hdf5-1.8.11\build\bin\Debug\hdf5_hl_D.lib;I:/zlib-1.2.5/build/bin/Debug/libzlib_D.lib;I:/szip-2
.1/build/bin/Debug/libszip_D.lib;J:/curl-7.29.0/builds/libcurl-vc10-x86-debug-static-ipv6-sspi-spnego-winssl/lib/libcurl_a_debug.lib;I:/hdf4_explorer/windows/lib/debug/singlethread
ed/hm421d.lib;I:/hdf4_explorer/windows/lib/debug/singlethreaded/hd421d.lib
However, when I opened the generated solution, I get a compiler error
because the HDF4 header file still cannot be found by the compiler
2>J:\netcdf-c-4.3.1-rc3\include\nc4internal.h(32): fatal error C1083:
Cannot open include file: 'mfhdf.h': No such file or directory
this is the offending line
#ifdef USE_HDF4
#include <mfhdf.h>
#endif
By looking at the project settings, for example for the project
'netcdf4', these are the names included in the "Additional Include
directories", under the "C++ "->"General" option
J:/netcdf-c-4.3.1-rc3/build/libsrc4;J:/netcdf-c-4.3.1-rc3/libsrc4;I:/hdf5-1.8.11/src;I:/zlib-1.2.5;J:/curl-7.29.0/builds/libcurl-vc10-x86-debug-static-ipv6-sspi-spnego-winssl/include;J:/netcdf-c-4.3.1-rc3/include;J:/netcdf-c-4.3.1-rc3/oc2;J:/netcdf-c-4.3.1-rc3/libsrc;J:/netcdf-c-4.3.1-rc3/build;J:/netcdf-c-4.3.1-rc3/libsrc4/.;%(AdditionalIncludeDirectories)
As you can see the HDF5, zlib, curl locations are all there, but the HDF4
location is missing
A workaround for now is to add these locations manually, thanks for
looking into this.
Pedro
------------
pvicente@xxxxxxx
Department of Earth System Science
3200 Croul Hall
University of California, Irvine
Irvine, CA 92697-3100
----- Original Message ----- From: "Ward Fisher"
<wfisher@xxxxxxxxxxxxxxxx>
To: "Pedro Vicente" <pvicente@xxxxxxx>
Sent: Tuesday, October 08, 2013 10:22 AM
Subject: Re: [netcdfgroup] netCDF-C 4.3.1-rc3 now available --- HDF4
Cmake support ?
Hi Pedro,
It is complaining that it cannot find mfhdf.h; is this file present? If
it is, then CMake should be locating it (assuming it is on the standard
path); otherwise, if it is not on the standard path, you may need to
pass the location to CMake using (I believe) -DHAVE_MFHDF_H=<path>, or
by specifying the path using the 'CFLAGS' variable. I will look into
this.
-Ward
On 10/8/13 12:14 AM, Pedro Vicente wrote:
Ward
Is there a way that I can make the Cmake build detect the HDF4 headers
and libraries ?
I tried
$cd build
$cmake -C ../cmake/ConfigUser.cmake <all my previous
options> -D"ENABLE_HDF4=ON"
where <all my previous options> are the options I used previously
regarding HDF5, curl, etc.
I got the error
--
-- Looking for mfhdf.h
-- Looking for mfhdf.h - not found
CMake Error at CMakeLists.txt:411 (MESSAGE):
HDF4 Support specified, cannot find file mfhdf.h
I tried the 'NC_USE_STATIC_CRT' option and it generated the projects
with the static CRTs, thank you for doing that.
Pedro
------------
pvicente@xxxxxxx
Department of Earth System Science
3200 Croul Hall
University of California, Irvine
Irvine, CA 92697-3100
----- Original Message ----- From: "Ward Fisher"
<wfisher@xxxxxxxxxxxxxxxx>
To: <netcdfgroup@xxxxxxxxxxxxxxxx>
Sent: Tuesday, September 24, 2013 3:26 PM
Subject: [netcdfgroup] netCDF-C 4.3.1-rc3 now available
Hello all,
On behalf of the netCDF-C development team, we are happy to announce
the availability of the third release candidate for netCDF-C version
4.3.1.
Highlights of this release beyond the previous release candidate
include:
* netCDF-4 compilation with OpenMPI as an alternative to MPICH2.
* Addressed Parallel netCDF-4 hanging when using HDF5 1.8.10.
* Large File Support on Windows is now functional.
* A new option for CMake-based Visual Studio builds,
'NC_USE_STATIC_CRT', used to specify which type of CRT libraries to
link against (shared being the default).
Source-code zip and tar.gz archives can be found at:
http://github.com/Unidata/netcdf-c/releases/tag/v4.3.1-rc3
Complete release notes may be found at:
http://www.unidata.ucar.edu/software/netcdf/docs_rc/release_notes.html
Pre-built Windows binaries are available from:
http://www.unidata.ucar.edu/netcdf/docs_rc/winbin.html
We look forward to addressing any issues, questions or concerns which
may arise from this release candidate.
Thank you in advance,
-Ward
Ward Fisher
wfisher@xxxxxxxxxxxxxxxx
_______________________________________________
netcdfgroup mailing list
netcdfgroup@xxxxxxxxxxxxxxxx
For list information or to unsubscribe, visit:
http://www.unidata.ucar.edu/mailing_lists/
