I re-started edex_camel and re-insgested manually, but it’s still ‘GribModel:…’
in Product Browser and in grid_info table in “psql metada.”
Efren A. Serra (Contractor)
SAIC/DeVine Consulting, Inc.
Naval Research Laboratory
Marine Meteorology Division
7 Grace Hopper Ave., STOP 2
Monterey, CA 93943
Code 7542
Office: 831-656-4780
From: Michael James [mailto:mjames@xxxxxxxx]
Sent: Monday, April 03, 2017 1:49 PM
To: Serra, Mr. Efren, Contractor, Code 7531
Cc: awips2-users@xxxxxxxxxxxxxxxx
Subject: Re: [awips2-users] Display a New Grid in D2D
On Mon, Apr 3, 2017 at 2:37 PM, Serra, Mr. Efren, Contractor, Code 7531
<efren.serra.ctr@xxxxxxxxxxxxxxx<mailto:efren.serra.ctr@xxxxxxxxxxxxxxx>> wrote:
Hi – I went through the sequence of steps in Adding a new grid to EDEX below;
most of it worked, with the exception of the model name in the Product Browser
under Grid. The model names display are “GribModel:52:0:30” and
“GribModel:58:10:0”, instead of name as specified in the
gribModels_NRLMMD-52.xml and gribModels_NRLMMD-58.xml files, e.g.,. which I
placed under:
1. /awips2/edex/data/utility/edex_static/base/grib/models
2. /awips2/edex/data/utility/edex_static/site/MON/grib/models (MON stands
for MONTEREY)
Are these correct?! Thanks for your help. Image attached shows the names
displayed in the Product Browser.
Both locations are correct but the second one is unnecessary unless you want to
supersede any of the definitions in the first.
I can't tell if you restarted/re-ingested after making these changes... after
adding or editing files in
/awips2/edex/data/utility/edex_static/base/grib/models you will need to restart
edex (service edex_camel restart) and re-ingest the grib files again (copy
again to /awips2/data_store/manual). If you already did restart/reingest then
there is something else which needs to be resolved, and we'll have to look at
your new grid projection file and these model definitions more closely. Let me
know if this is the case and we can continue this off-list.
-Michael
