All,
Well I have somewhat good news. It looks like I might have compiled the
source successfully. At least the system didn't crash.
One tutorial stated I should be able to run gdplot from the command line.
But I get an error when I try that, stating that gdplot can't be found. I
haven't found gdplot in the directory structure yet, but I have found other
apps like alist (I think that was it!). Anyway, I think maybe my problem is
that paths and environmental variables may be off.
Does that sound reasonable?
Paul
From: Tyle, Kevin R [mailto:ktyle@xxxxxxxxxx]
Sent: Wednesday, December 19, 2018 4:02 PM
To: Paul H. Lewis <phldml3@xxxxxxx>
Cc: 'gembud' <gembud@xxxxxxxxxxxxxxxx>
Subject: RE: [gembud] Gempak-7.4.5.deb installation
Hi Paul, no problem! You'll find it in your GEMPAK7/config directory.
Cheers,
Kevin
_____________________________________________
Kevin Tyle, M.S., Manager of Departmental Computing
Dept. of Atmospheric & Environmental Sciences
University at Albany
Earth Science 235, 1400 Washington Avenue
Albany, NY 12222
Email: ktyle@xxxxxxxxxx <mailto:ktyle@xxxxxxxxxx>
Phone: 518-442-4578
_____________________________________________
From: Paul H. Lewis [mailto:phldml3@xxxxxxx]
Sent: Wednesday, December 19, 2018 5:00 PM
To: Tyle, Kevin R <ktyle@xxxxxxxxxx <mailto:ktyle@xxxxxxxxxx> >; 'Pete
Pokrandt' <poker@xxxxxxxxxxxx <mailto:poker@xxxxxxxxxxxx> >; 'Michael James'
<mjames@xxxxxxxx <mailto:mjames@xxxxxxxx> >
Cc: 'gembud' <gembud@xxxxxxxxxxxxxxxx <mailto:gembud@xxxxxxxxxxxxxxxx> >
Subject: RE: [gembud] Gempak-7.4.5.deb installation
Kevin,
Thank you for this! Sorry for the noob question, but where is the
Makeinc.common_linux file located?
I found Makefile in ./GEMPAK7/extlibs/netCDF that has the following line:
NETCDF = $(OS-LIB)/libnetcdf.a
I'm thinking that is the line that you are saying needs replaced, but I'm
hesitant to edit the change with out confirmation.
Best Regards,
Paul
From: gembud-bounces@xxxxxxxxxxxxxxxx
<mailto:gembud-bounces@xxxxxxxxxxxxxxxx>
[mailto:gembud-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Tyle, Kevin R
Sent: Monday, December 17, 2018 2:05 PM
To: Pete Pokrandt <poker@xxxxxxxxxxxx <mailto:poker@xxxxxxxxxxxx> >; Michael
James <mjames@xxxxxxxx <mailto:mjames@xxxxxxxx> >
Cc: gembud <gembud@xxxxxxxxxxxxxxxx <mailto:gembud@xxxxxxxxxxxxxxxx> >
Subject: Re: [gembud] Gempak-7.4.5.deb installation
I can report that the resulting HDF5 library errors are eliminated by
editing Makeinc.common_linux so that the NETCDF line reads:
NETCDF = $(OS_LIB)/libnetcdf.a -ldl -lz $(OS_LIB)/libhdf5_hl.a
$(OS_LIB)/libhdf5.a
_____________________________________________
Kevin Tyle, M.S., Manager of Departmental Computing
Dept. of Atmospheric & Environmental Sciences
University at Albany
Earth Science 235, 1400 Washington Avenue
Albany, NY 12222
Email: ktyle@xxxxxxxxxx <mailto:ktyle@xxxxxxxxxx>
Phone: 518-442-4578
_____________________________________________
From: Pete Pokrandt [mailto:poker@xxxxxxxxxxxx]
Sent: Monday, December 17, 2018 12:58 PM
To: Michael James <mjames@xxxxxxxx <mailto:mjames@xxxxxxxx> >; Tyle, Kevin R
<ktyle@xxxxxxxxxx <mailto:ktyle@xxxxxxxxxx> >
Cc: gembud <gembud@xxxxxxxxxxxxxxxx <mailto:gembud@xxxxxxxxxxxxxxxx> >
Subject: Re: [gembud] Gempak-7.4.5.deb installation
To add to the conversation, I had a student trying to build on OSX with
similar hdf and netcdf issues..
I haven't had a chance to look too deeply into it as she is back in China
now, but it sounds very much like what we're discussing here.
Pete
--
Pete Pokrandt - Systems Programmer
UW-Madison Dept of Atmospheric and Oceanic Sciences
608-262-3086 - poker@xxxxxxxxxxxx <mailto:poker@xxxxxxxxxxxx>
_____
From: gembud-bounces@xxxxxxxxxxxxxxxx
<mailto:gembud-bounces@xxxxxxxxxxxxxxxx> <gembud-bounces@xxxxxxxxxxxxxxxx
<mailto:gembud-bounces@xxxxxxxxxxxxxxxx> > on behalf of Michael James
<mjames@xxxxxxxx <mailto:mjames@xxxxxxxx> >
Sent: Monday, December 17, 2018 11:43 AM
To: Tyle, Kevin R
Cc: gembud
Subject: Re: [gembud] Gempak-7.4.5.deb installation
Hi all,
In NAWIPS 7.5.1, NCEP added support to display netCDF 4 GOES-16/17 satellite
imagery, and so the library will be compiled with netcdf4 enabled from that
release forward. In August I began to merge the NCEP 7.5.1 changes into
Unidata GEMPAK, and removed the "-disable-netcdf4" flag from the extlibs
build, but have held back on releasing the 7.5.1 due to some compilation
issues with the new im_rcdf4 and gossae4 subroutines (which is why Unidata
GEMPAK is at release 7.4.5 right now).
The RPMs and Debian binaries are containerized builds where on each OS
GEMPAK is built from source, so I know for certain that the CentOS builds
are complete *in those container environments* and within the installed
RPMs. However, it appears that the Debian build is broken because of this,
as mentioned here, and needs some attention from me to account for hdf5 and
netcdf4.
Michael James
Unidata Program Center
Boulder, CO
On Mon, Dec 17, 2018 at 9:22 AM Tyle, Kevin R <ktyle@xxxxxxxxxx
<mailto:ktyle@xxxxxxxxxx> > wrote:
(haha, hit the send button too aggressively) . last sentence should read:
Maybe we could just go back to not enabling netcdf4 when netcdf is built?
_____________________________________________
Kevin Tyle, M.S., Manager of Departmental Computing
Dept. of Atmospheric & Environmental Sciences
University at Albany
Earth Science 235, 1400 Washington Avenue
Albany, NY 12222
Email: ktyle@xxxxxxxxxx <mailto:ktyle@xxxxxxxxxx>
Phone: 518-442-4578
_____________________________________________
From: gembud-bounces@xxxxxxxxxxxxxxxx
<mailto:gembud-bounces@xxxxxxxxxxxxxxxx>
[mailto:gembud-bounces@xxxxxxxxxxxxxxxx
<mailto:gembud-bounces@xxxxxxxxxxxxxxxx> ] On Behalf Of Tyle, Kevin R
Sent: Monday, December 17, 2018 11:18 AM
To: gembud <gembud@xxxxxxxxxxxxxxxx <mailto:gembud@xxxxxxxxxxxxxxxx> >
Subject: Re: [gembud] Gempak-7.4.5.deb installation
The configuration process for netCDF, as set in
$NAWIPS/extlibs/netCDF/Makefile has removed -disable-netcdf4 which existed
in earlier versions. This makes netcdf look for locations of the hdf5
libraries and include directories. The latter is not properly specified in
$NAWIPS/extlibs/netCDF/makefile.common . The NCENV line needs to have
"CPPFLAGS=-I$(OS_INC)". That eliminates the error with hdf5.inc not being
found, and thus the netcdf configuration and build proceeds. Howver, later
on in the build, errors linking to various hdf5 libraries occur, so some
more work needs to be done there.
It's unclear to me if there's some functionality in these most recent GEMPAK
versions that require netCDF4 (and thus HDF5), so I'm cc'ing Michael James
here. Maybe we could just go back to not
_____________________________________________
Kevin Tyle, M.S., Manager of Departmental Computing
Dept. of Atmospheric & Environmental Sciences
University at Albany
Earth Science 235, 1400 Washington Avenue
Albany, NY 12222
Email: ktyle@xxxxxxxxxx <mailto:ktyle@xxxxxxxxxx>
Phone: 518-442-4578
_____________________________________________
From: gembud-bounces@xxxxxxxxxxxxxxxx
<mailto:gembud-bounces@xxxxxxxxxxxxxxxx>
[mailto:gembud-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Mike Zuranski
Sent: Sunday, December 16, 2018 4:41 PM
To: gembud <gembud@xxxxxxxxxxxxxxxx <mailto:gembud@xxxxxxxxxxxxxxxx> >
Subject: Re: [gembud] Gempak-7.4.5.deb installation
"Older versions of 7 built on Ubuntu."
This was true for me as well, same system, pretty sure it was version 7.4.2.
I looked at the GEMPAK Github page and saw they went with updated versions
of zlib, hdf5 and netcdf4 in 7.4.3, so I feel like that's related.
-Mike
======================
Mike Zuranski
Meteorology Support Analyst
College of DuPage - Nexlab
Weather.cod.edu <http://Weather.cod.edu>
======================
On Sun, Dec 16, 2018 at 3:15 PM Mullenax, Robert R. (WFF-820.0)[ORBITAL
SCIENCES CORPORATION] <robert.r.mullenax@xxxxxxxx
<mailto:robert.r.mullenax@xxxxxxxx> > wrote:
I tried building on CentOS 7 and it failed with NetCDF as well. I sent a
message to Unidata about it but did not get an auto reply from
support-gempak so don't know if they got it. I didn't get a reply from
gembud either. I just used the CentOS rpm and it worked ok. I have Ubuntu
systems but have not tried to upgrade those yet. Older versions of 7 built
on Ubuntu.
On Dec 16, 2018, at 2:04 PM, Mike Zuranski <zuranski@xxxxxxxxxxxxxxx
<mailto:zuranski@xxxxxxxxxxxxxxx> > wrote:
Hi all,
I ran into the same issue and then some...
Traditionally I've always built GEMPAK from source, but figured I'd try the
.deb file this time. After deploying it however, like Paul I didn't have
most of the executables. Some of the decoders got built, maybe one or two
other things, but no gd, gp or most other programs. So I tried building
from source, but that didn't work either...
When building from source, it looked like it failed at making netCDF. I'm
writing this from home so I don't have any log files on me at the moment,
but it appeared as though it made HDF5 okay, but the netCDF build couldn't
find hdf5.h and failed. Without netCDF, those other programs failed as
well. The strange part was hdf5.h seemed like it existed in the right
place, so I'm not sure what happened. This was for both 7.4.3 and 7.4.5 on
Ubuntu 18.04.1, I was going to try on another machine before writing in
about it in case it was something local, but Paul described the same thing
so maybe it's not just me.
Hope this provides some clues. If anyone wants more info, let me know and I
can include make & configure logs when I get in the office on Monday.
-Mike
======================
Mike Zuranski
Meteorology Support Analyst
College of DuPage - Nexlab
Weather.cod.edu <http://Weather.cod.edu>
======================
On Sat, Dec 15, 2018 at 11:37 PM Paul H. Lewis <phldml3@xxxxxxx
<mailto:phldml3@xxxxxxx> > wrote:
Hello,
I have been trying to get GEMPAK working on a Ubuntu Linux 16.04 server.
Latest attempt was installing the version 7.4.5. As I understand I should
be able to test by running gdplot.
When I type gdplot I get:
No command 'gdplot' found..
Environmental variables are set as instructed in .profile. But the issue I
am having appears to be that there is no executables in the package. Was
there another step that I have missed?
Thank you,
Paul
_______________________________________________
NOTE: All exchanges posted to Unidata maintained email lists are
recorded in the Unidata inquiry tracking system and made publicly
available through the web. Users who post to any of the lists we
maintain are reminded to remove any personal information that they
do not want to be made public.
gembud mailing list
gembud@xxxxxxxxxxxxxxxx <mailto:gembud@xxxxxxxxxxxxxxxx>
For list information or to unsubscribe, visit:
http://www.unidata.ucar.edu/mailing_lists/
_______________________________________________
NOTE: All exchanges posted to Unidata maintained email lists are
recorded in the Unidata inquiry tracking system and made publicly
available through the web. Users who post to any of the lists we
maintain are reminded to remove any personal information that they
do not want to be made public.
gembud mailing list
gembud@xxxxxxxxxxxxxxxx <mailto:gembud@xxxxxxxxxxxxxxxx>
For list information or to unsubscribe, visit:
http://www.unidata.ucar.edu/mailing_lists/
_______________________________________________
NOTE: All exchanges posted to Unidata maintained email lists are
recorded in the Unidata inquiry tracking system and made publicly
available through the web. Users who post to any of the lists we
maintain are reminded to remove any personal information that they
do not want to be made public.
gembud mailing list
gembud@xxxxxxxxxxxxxxxx <mailto:gembud@xxxxxxxxxxxxxxxx>
For list information or to unsubscribe, visit:
http://www.unidata.ucar.edu/mailing_lists/
